Jump to content

Cycle of quantification/qualification

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 72.217.39.179 (talk) at 21:17, 15 April 2020 (C(sub)t is the appropriate abbreviation, and the concept is called the threshold cycle.). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Cycle of quantification/qualification (Cq) is a parameter used in real-time polymerase chain reaction techniques, indicating the cycle number where a PCR amplification curve meets a predefined mathematical criterion. A Cq may be used for quantification of the target sequence or to determine whether the target sequence is present or not.

Two criteria to determine the Cq are used by different thermocyclers: Threshold Cycle (Ct) is the number of cycles required for the fluorescent signal to cross a given value threshold. Usually, the threshold is set above the baseline, about 10 times the standard deviation of the noise of the baseline,[1] to avoid random effects on the Ct. However, the threshold shouldn't be set much higher than that to avoid reduced reproducibility due to uncontrolled factors. Crossing point (Cp) and Take off point (TOP) are the cycle value of the maximum second derivative of the amplification curve.[2]

References

  1. ^ "Life Technologies : Real-time PCR handbook" (PDF). Gene-quantification.com. Retrieved 2015-09-27.
  2. ^ Tichopad, A.; Dilger, M.; Schwarz, G.; Pfaffl, M. W. (2003). "Standardized determination of real-time PCR effciency from a single reaction set-up" (PDF). Nucleic Acids Research. 31 (20). Gene-quantification.com: 122e–122. doi:10.1093/nar/gng122. PMC 219490. PMID 14530455. Retrieved 2015-09-27.