Reflection mapping
![](http://upload.wikimedia.org/wikipedia/commons/thumb/5/5c/Spoon_fi.jpg/220px-Spoon_fi.jpg)
In computer graphics, environment mapping,[1][2][3] or reflection mapping, is an efficient image-based lighting technique for approximating the appearance of a reflective surface by means of a precomputed texture image. The texture is used to store the image of the distant environment surrounding the rendered object.
Several ways of storing the surrounding environment are employed. The first technique was sphere mapping, in which a single texture contains the image of the surroundings as reflected on a mirror ball. It has been almost entirely surpassed by cube mapping, in which the environment is projected onto the six faces of a cube and stored as six square textures or unfolded into six square regions of a single texture. Other projections that have some superior mathematical or computational properties include the paraboloid mapping, the pyramid mapping, the octahedron mapping, and the HEALPix mapping.
Reflection mapping is one of several approaches to reflection rendering, alongside e.g. screen space reflections or ray tracing which computes the exact reflection by tracing a ray of light and following its optical path. The reflection color used in the shading computation at a pixel is determined by calculating the reflection vector at the point on the object and mapping it to the texel in the environment map. This technique often produces results that are superficially similar to those generated by raytracing, but is less computationally expensive since the radiance value of the reflection comes from calculating the angles of incidence and reflection, followed by a texture lookup, rather than followed by tracing a ray against the scene geometry and computing the radiance of the ray, simplifying the GPU workload.
However, in most circumstances a mapped reflection is only an approximation of the real reflection. Environment mapping relies on two assumptions that are seldom satisfied:
- All radiance incident upon the object being shaded comes from an infinite distance. When this is not the case the reflection of nearby geometry appears in the wrong place on the reflected object. When this is the case, no parallax is seen in the reflection.
- The object being shaded is convex, such that it contains no self-interreflections. When this is not the case the object does not appear in the reflection; only the environment does.
Reflection mapping is also a traditional image-based lighting technique for creating reflections of real-world backgrounds on synthetic objects.
Environment mapping is generally the fastest method of rendering a reflective surface. To further increase the speed of rendering, the renderer may calculate the position of the reflected ray at each vertex. Then, the position is interpolated across polygons to which the vertex is attached. This eliminates the need for recalculating every pixel's reflection direction.
If normal mapping is used, each polygon has many face normals (the direction a given point on a polygon is facing), which can be used in tandem with an environment map to produce a more realistic reflection. In this case, the angle of reflection at a given point on a polygon will take the normal map into consideration. This technique is used to make an otherwise flat surface appear textured, for example corrugated metal, or brushed aluminium.
Types
Sphere mapping
Sphere mapping represents the sphere of incident illumination as though it were seen in the reflection of a reflective sphere through an orthographic camera. The texture image can be created by approximating this ideal setup, or using a fisheye lens or via prerendering a scene with a spherical mapping.
The spherical mapping suffers from limitations that detract from the realism of resulting renderings. Because spherical maps are stored as azimuthal projections of the environments they represent, an abrupt point of singularity (a “black hole” effect) is visible in the reflection on the object where texel colors at or near the edge of the map are distorted due to inadequate resolution to represent the points accurately. The spherical mapping also wastes pixels that are in the square but not in the sphere.
The artifacts of the spherical mapping are so severe that it is effective only for viewpoints near that of the virtual orthographic camera.
Cube mapping
![](http://upload.wikimedia.org/wikipedia/commons/thumb/6/67/Cube_mapped_reflection_example.jpg/220px-Cube_mapped_reflection_example.jpg)
Cube mapping and other polyhedron mappings address the severe distortion of sphere maps. If cube maps are made and filtered correctly, they have no visible seams, and can be used independent of the viewpoint of the often-virtual camera acquiring the map. Cube and other polyhedron maps have since superseded sphere maps in most computer graphics applications, with the exception of acquiring image-based lighting. Image-based Lighting can be done with parallax-corrected cube maps.[4]
Generally, cube mapping uses the same skybox that is used in outdoor renderings. Cube-mapped reflection is done by determining the vector that the object is being viewed at. This camera ray is reflected about the surface normal of where the camera vector intersects the object. This results in the reflected ray which is then passed to the cube map to get the texel which provides the radiance value used in the lighting calculation. This creates the effect that the object is reflective.
HEALPix mapping
HEALPix environment mapping is similar to the other polyhedron mappings, but can be hierarchical, thus providing a unified framework for generating polyhedra that better approximate the sphere. This allows lower distortion at the cost of increased computation.[5]
History
Precursor work in texture mapping had been established by Edwin Catmull, with refinements for curved surfaces by James Blinn, in 1974. [1] Blinn went on to further refine his work, developing environment mapping by 1976. [2]
Gene Miller experimented with spherical environment mapping in 1982 at MAGI Synthavision.
Wolfgang Heidrich introduced Paraboloid Mapping in 1998.[6]
Emil Praun introduced Octahedron Mapping in 2003.[7]
Mauro Steigleder introduced Pyramid Mapping in 2005.[8]
Tien-Tsin Wong, et al. introduced the existing HEALPix mapping for rendering in 2006.[5]
See also
References
- ^ http://www.pearsonhighered.com/samplechapter/0321194969.pdf
- ^ http://web.cse.ohio-state.edu/~whmin/courses/cse5542-2013-spring/17-env.pdf
- ^ http://www.ics.uci.edu/~majumder/VC/classes/BEmap.pdf
- ^ http://seblagarde.wordpress.com/2012/09/29/image-based-lighting-approaches-and-parallax-corrected-cubemap/
- ^ a b Tien-Tsin Wong, Liang Wan, Chi-Sing Leung, and Ping-Man Lam. Real-time Environment Mapping with Equal Solid-Angle Spherical Quad-Map, Shader X4: Lighting & Rendering, Charles River Media, 2006.
- ^ Heidrich, W., and H.-P. Seidel. "View-Independent Environment Maps". Eurographics Workshop on Graphics Hardware 1998, pp. 39–45.
- ^ Emil Praun and Hugues Hoppe. "Spherical parametrization and remeshing". ACM Transactions on Graphics, 22(3):340–349, 2003.
- ^ Mauro Steigleder. "Pencil Light Transport". A thesis presented to the University of Waterloo, 2005.