Jump to content

Rimrock Lake

Coordinates: 46°39′23″N 121°07′46″W / 46.65639°N 121.12944°W / 46.65639; -121.12944
From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Ser Amantio di Nicolao (talk | contribs) at 00:18, 13 May 2020 (add authority control). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Rimrock Lake
Aerial view of Tieton Dam and Rimrock Lake from the downstream side of the dam.
LocationYakima County, Washington, United States
Coordinates46°39′23″N 121°07′46″W / 46.65639°N 121.12944°W / 46.65639; -121.12944
Typereservoir
Primary inflowsTieton River
Primary outflowsTieton River
Catchment area187 mi² (484 km²)
Basin countriesUnited States
Max. length6 mi (9.7 km)
Max. width1 mi (1.6 km)
Water volume0.0586 cu mi (0.244 km3)
Surface elevation2926 ft (892 m)

Rimrock Lake is a lake along the course of the Tieton River, in Yakima County, Washington state, US.

The lake is used as a storage reservoir for the Yakima Project, an irrigation project run by the United States Bureau of Reclamation. An impoundment of the Tieton River, Rimrock Lake's capacity and discharge is controlled by Tieton Dam, a 319-foot (97 m) high structure built in 1925. Rimrock Lake's active capacity is 198,000 acre-feet (244,000,000 m3).[1]

Upstream from the lake, the Tieton River is impounded by Clear Creek Dam, another element of the Yakima Project. About 8 miles (13 km) downstream from Rimrock Lake the Tieton River is tapped by the Tieton Diversion Dam, supplying water to the Tieton Main Canal. The canal supplies irrigation water to the Tieton Division of the Yakima Project, with excess and agricultural runoff draining into Ahtanum Creek, west of Yakima.[1]

Near the lakes are the communities of Rimrock and Silver Beach.

References

  • "Tieton Dam". United States Bureau of Reclamation.
  • "Rimrock Lake". Geographic Names Information System. United States Geological Survey, United States Department of the Interior.