Jump to content

Ray Wedgwood

Add links
From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by MB (talk | contribs) at 03:19, 6 July 2020 (clean up, typo(s) fixed: ’s → 's (2)). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Ray Wedgwood
Born27 May 1942 (1942-05-27)
Dorrigo, New South Wales, Australia
DiedMarch 5, 2020(2020-03-05) (aged 77)
EducationUniversity of Sydney
OccupationEngineer
Engineering career
DisciplineCivil, bridges
InstitutionsInstitution of Engineers Australia
Employer(s)Department of Main Roads, NSW: Roads and Traffic Authority of NSW
ProjectsAnzac Bridge
Macarthur Bridge
Captain Cook Bridge
M4 Viaduct Granville

Raymond John Lloyd Wedgwood (27 May 1942 – 5 March 2020) was an Australian engineer who served as the Chief Bridge Engineer of the NSW Department of Main Roads (DMR) and the Roads and Traffic Authority of NSW (RTA). He designed and supervised the construction of many major bridges across New South Wales and led the design team for the cable stayed Anzac Bridge in Sydney. He also played a pivotal role in the development of a common code of bridge design practice used by all Australian state road authorities.

Early life

Wedgwood was born in Dorrigo, New South Wales, and grew up in nearby Bellingen. He was educated at Coffs Harbour High School and, on completing his secondary education, was awarded a cadetship by the DMR to attend the University of Sydney to study civil engineering.[1][2]

Career

After graduating with a Bachelor of Civil Engineering (Hons) degree in 1963 Wedgwood commenced employment in the DMR's Bridge Section in Sydney where his first bridge design involvement was for a curved reinforced concrete box section bridge over the F3 Motorway at Mt White.[1] This bridge was one of the first curved structures designed by the authority. Soon after he was appointed as the Resident Engineer to supervise the construction of Captain Cook Bridge over the Georges River at Taren Point.[3][2]

On completion of the Captain Cook Bridge he returned to the DMR bridge design section where he developed the design for a major composite steel and concrete box girder bridge on what was then the Hume Highway over the Nepean River at Camden, later to be known as Macarthur Bridge.[4] This design adopted an innovative form of prestressing in which the continuous steel trapezoidal box girder sets would be set up with cambers of 60 inches at the center of the six-span set. After casting, the concrete deck would then be lowered by a controlled process to redistribute the stresses, matching the positive and negative bending moment capacities of the sections. Having completed the design Wedgwood was appointed as the Resident Engineer charged with supervision of the construction of the bridge.[1][2]

In 1987 Wedgwood was appointed as the Chief Bridge Engineer of the DMR shortly before the department was merged with others to form the Roads and Traffic Authority of NSW. Wedgwood became the Chief Bridge Engineer of the new authority. It was a time when both the NSW State Government and the Australian Federal Government were making major investments in road development. A series of projects aimed at duplicating the Hume Highway between Sydney and Melbourne were underway and a new proposal to duplicate the Pacific Highway from north of Newcastle to Brisbane was being developed. Together with major urban road development these initiatives saw record spending on roads and bridges and the need to develop designs for many major bridge structures.[5]

In the late 1980s Wedgwood was appointed as the New South Wales representative on the Austroads committee that was working to develop a new bridge design code to be used by all the Australian state road authorities. By the early 1990s Wedgwood had become the chair of that committee and in 1992 the new code was released. It was the first bridge design code in Australia to be based on limit state design. Continuing as the chair of the committee Wedgwood further developed the code to the point when it could be re-released as Australian Standard (AS 1500) for bridge design in 2004, at which time Austroads awarded Wedgwood the Austroads Medal for his work.[6]

When the NSW Government charged the RTA with developing proposals to extend the Western Distributor freeway on the western approach to the Sydney CBD a solution needed to be found for a crossing of Blackwattle Bay at Glebe Island. The existing bridge at that location had been constructed in 1903, provided only four lanes of traffic and, as an opening swing span bridge, caused frequent stoppages in traffic. Regular use of the channel under the bridge by large cargo ships and the presence of underwater power supply cables prevented the new bridge from being a multi span structure.[1][2]

After a suggestion made by Fritz Leonhardt on a visit to Sydney, Wedgwood and his design team chose a cable stayed design for the new long span bridge. The choice was controversial, with some critics claiming that the proposed solution was too grand and too expensive for the location.[1] Despite the criticisms Wedgwood persisted with the proposal and eventually the NSW Government made a commitment to the project, with the construction company Baulderstone Hornibrook Engineering Pty Ltd appointed as the builders. The bridge was opened to traffic on 3 December 1995 as the Glebe Island Bridge. It was later renamed Anzac Bridge on Remembrance Day in 1998.[1]

In 1999 Wedgwood was appointed as the General Manager of Technical Services at the RTA responsible for delivering all aspects of road, bridge pavement and traffic engineering services to the organisation, a position he held until his retirement in 2004.[1]

Later life

After his retirement from the Roads and Traffic Authority in 2004 Wedgwood became an ex-officio member of the organisation's Heritage Committee and took an active role in developing improved methods of preserving heritage bridges. He also spoke publicly on matters of bridge history being a frequent guest on the Australia All Over radio program on ABC Radio.[7]

Between 2008 and 2011, together with another former NSW Chief Bridge Engineer, Brian Pearson, he provided technical advice to the ACT Government about the heritage issues and structural refurbishment of the historic timber truss bridge over the Murrumbidgee River at Tharwa.[2]

Between 2012 and 2018, he and Brian Pearson argued for the retention of the historic Windsor Bridge as a heritage structure when it was facing demolition as part of the bridge replacement program. The new bridge and approaches cut into Thompson Square in Windsor damaging what is widely regarded as an important feature of early colonial history.[8][9]

He also contributed to several book on heritage bridge issues, notably Bridging Sydney, a history of the Sydney Harbour Bridge (2006), and The Timber Truss Bridge Book (2019).[10][11]

Wedgwood died at Beverly Hills, NSW on 5 March 2020.

Awards

References

  1. ^ a b c d e f g Roads and Traffic Authority, “Oral History Program Recordings – Career Highlights – Ray Wedgwood”, 12 October 2004.
  2. ^ a b c d e Wheen, Rob (28 April 2020). "Engineer and designer worked on Captain Cook Bridge and Anzac Bridge". Sydney Morning Herald. Retrieved 30 Apr 2020.{{cite news}}: CS1 maint: url-status (link)
  3. ^ O'Rourke, Jim (28 May 2015). "A Bold Symbol of Nation's Progress; Sydney's Captain Cook Bridge marks 50 years". Daily Telegraph. Retrieved 22 April 2020.{{cite news}}: CS1 maint: url-status (link)
  4. ^ New South Wales Department of Main Roads (1976). The Roadmakers (PDF). Sydney: Department of Main Roads. p. 254. ISBN 0724004394.
  5. ^ Broomham, Rosemary (2001). Vital Connections: a history of NSW roads from 1788. Alexandria, NSW: Hale and Iremonger and Roads and Traffic Authority NSW. pp. 164–191. ISBN 0868067032.
  6. ^ "Case Study: Bridge Design Standards that Hold Up" (PDF). Standards Australia. 22 April 2020.{{cite web}}: CS1 maint: url-status (link)
  7. ^ Ashet Oral History Project (23 October 2012). "Timber truss bridges of NSW; interview with Brian Pearson and Ray Wedgwood" (PDF). Retrieved 22 April 2020.{{cite web}}: CS1 maint: url-status (link)
  8. ^ Saulwick, Jacob (3 January 2013). "Windsor Bridge plan a political folly, say engineers". Sydney Morning Herald. Retrieved 22 April 2020.{{cite news}}: CS1 maint: url-status (link)
  9. ^ "Submission to the NSW Government Inquiry into the replacement of Windsor Bridge" (PDF). NSW Government. 23 January 2018.{{cite web}}: CS1 maint: url-status (link)
  10. ^ Coltheart, Lenore and Nicholas, Amie (eds) (2019). The Timber Truss Bridge Book. Transport for NSW. ISBN 9781925891324. {{cite book}}: |last= has generic name (help)CS1 maint: multiple names: authors list (link)
  11. ^ Mackaness, Caroline (ed) (2006). Bridging Sydney. Sydney: Historic Houses Trust. ISBN 9781876991227. {{cite book}}: |first= has generic name (help)
  12. ^ "Case Study: Bridge Design Standards that Hold Up" (PDF). Standards Australia. 22 April 2020.{{cite web}}: CS1 maint: url-status (link)
Retrieved from "https://en.wikipedia.org/w/index.php?title=Ray_Wedgwood&oldid=966267521"