Neukirchen–Weiden railway

Neukirchen–Weiden railway
Overview
Line number	5060
Locale	Bavaria, Germany
Service
Route number	870
Technical
Line length	51.5 km (32.0 mi)
Track gauge	1,435 mm (4 ft 8+1⁄2 in) standard gauge
Operating speed	140 km/h (87 mph)
Route map km elev from Nuremberg 0.000 Neukirchen (b Sulzbach- Rosenberg) 450 m to Schwandorf 4.500 Röckenricht B 85 8.150 Großalbershof 445 m 14.400 Schönlind (Oberpf) Vils 18.400 Schlicht 19.965 Vilseck 405 m to Vilseck Lager 24.400 Langenbruck 29.450 Freihung 416 m B 299 32.149 Thansüß 37.050 Röthenbach (Oberpf) 410 m 42.127 Weiherhammer 392 m Pilkington siding Haidenaab 44.886 Etzenricht 46.200 Weiden Bayernwerk siding 48.700 Ullersricht A 93 from Regensburg 51.514 Weiden (Oberpf) 397 m to Bayreuth to Oberkotzau Source: German railway atlas

The Neukirchen–Weiden railway is a 51-kilometre-long main line in Bavaria, Germany. It branches off the Nuremberg–Schwandorf railway at Neukirchen bei Sulzbach-Rosenberg station and runs via Vilseck to Weiden in der Oberpfalz.

History

The impetus for the construction of the line was a memorandum of 20 July 1869 from the Nuremberg Railway Committee to the Bavarian Eastern Railway Company (Bayerischen Ostbahnen). It argued that this route would be the shortest and most economical connection between Nuremberg and Weiden and that the line would also be important for freight traffic to and from Bohemia and central Germany.

Construction began in December 1873 after the route planning was completed in August 1872. The rails were supplied by Hammerwerk Hellziechen. The line was officially opened on 15 October 1875.

In 1973, the line, which had been built to branch line standards, was upgraded with extensive work to main line standards.

Route description

The line branches off the Nuremberg–Schwandorf line after Neukirchen station and runs east to the intersection with the B 85 and then turns to the north, running through several curves. After the village of Schönlind, the line crosses the Vils and runs parallel with it to Vilseck.

After Vilseck station, the line turns east in front of the deserted village of Langenbruck and runs past the southern edge of the Grafenwoehr Training Area through the Etzenricht forest to Weiherhammer. After Weiherhammer, the line crosses the Haidenaab and runs next to it to Etzenricht. The line then turns to the left, connects with the Regensburg–Weiden railway at Ullersricht and runs with it to Weiden station.

Line standards

The entire length of the line is single-track, equipped for tilting technology and not electrified. The maximum line speed is 140 km/h. In February 2017, the line class on a section between Großalbershof and Vilseck was reduced from D4 to A and the speed limit reduced to 110 km/h.

Transport association

The Neukirchen–Thansüß section is integrated into the Verkehrsverbund Großraum Nürnberg (Nuremberg Region Transport Association) as Regionalbahn service R41.

Trains

The Regional-Express service on the Nuremberg–Neukirchen–Weiden–Neustadt (Waldnaab)/Schwandorf(–Regensburg) route are operated by class 612 (Regioswinger) diesel railcars. These trains are coupled/split in Neukirchen (b. Sulzbach-Rosenberg) station.

References

Sources

• Eisenbahnatlas Deutschland [German railway atlas]. Schweers + Wall. 2017. ISBN 978-3-89494-146-8.