Jump to content

Schreder HP-21

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by SporkBot (talk | contribs) at 17:46, 12 December 2020 (Repair template parameters). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

HP-21
Role Glider
National origin United States
Designer Richard Schreder
First flight none
Number built none

The Schreder HP-21 was an American high-wing, variable geometry, V tailed, single seat motor glider project that was designed by Richard Schreder. None was ever completed or flown.[1][2][3]

Design and development

The HP-21 project was publicly announced in August 1982 in Soaring Magazine. Schreder said at that time: "the HP-21 will out-perform any other factory-built 15-Meter racer now in production."[1]

In April 1984 the design was revealed as a high performance V-tailed single seater, with a retractable KFM 107e powerplant of 25 hp (19 kW) for self-launching, mounted behind the cockpit and retracting rearward to lie in a bay. The propeller remained exposed when the engine was retracted. The non-tapered wing had a carbon fiber spar with a span of 49.2 ft (15.0 m) and a chord of only 18 in (46 cm), with winglets fitted. The wing incorporated a hand-crank operated retractable Dacron sailcloth flap that was intended to be extended for thermalling and retracted for glides. The flap was of triangular shape and when deployed would extend from the wing root to a point just inboard of the ailerons. The flap retracted by winding around a chrome-moly steel tube located inside the wing.[1][2]

Schreder went on to start work on the HP-22 before the HP-21 was finished and, even though the prototype HP-21 carried the registration of N38100, it was never registered and there is no indication that it was ever completed or flown.[3][4][5]

Specifications (HP-21)

Data from Soaring[1][2]

General characteristics

  • Crew: one
  • Wingspan: 49 ft 3 in (15 m)
  • Wing area: 74 sq ft (6.9 m2) flap retracted
  • Aspect ratio: 32.8:1
  • Powerplant: 1 × KFM 107e , 25 hp (19 kW)
  • Propellers: 2-bladed wooden

See also

References

  1. ^ a b c d Homebuilder News, Soaring Magazine, Volume 46, Number 8 page 11, August 1982. Soaring Society of America, USPS 499-920
  2. ^ a b c SSA In Action - Homebuilder News, Soaring Magazine, Volume 48, Number 4 page 8, April 1984. Soaring Society of America, USPS 499-920
  3. ^ a b Homebuilders News, Soaring Magazine, Volume 48, Number 6 page 27, June 1984. Soaring Society of America, USPS 499-920
  4. ^ Federal Aviation Administration (April 2011). "Make / Model Inquiry Results". Retrieved 20 April 2011.
  5. ^ Federal Aviation Administration (April 2011). "Make / Model Inquiry Results". Retrieved 20 April 2011.