Jump to content

Solid-state transformer

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 131.234.124.90 (talk) at 17:08, 6 January 2021. The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

A solid-state transformer (SST), power electronic transformer (PET), or electronic power transformer is actually an AC-to-AC converter, a type of electric power converter that replaces a conventional transformer used in AC electric power distribution. It is more complex than a conventional transformer operating at utility frequency, but it can be smaller and more efficient than a conventional transformer because it operates at high frequency. The main types are "true" AC-to-AC converter (with no DC stages) and AC-to-DC-to-DC-to-AC converter (in which an active rectifier supplies power to a DC-to-DC converter, which supplies power to a power inverter). A solid-state transformer usually contains a transformer, inside the AC-to-AC converter or DC-to-DC converter, which provides electrical isolation and carries the full power. This transformer is smaller due to smaller DC-DC inverting stages between transformer coils, which consequently mean smaller transformer coils required to step up or step down voltages. A solid-state transformer can actively regulate voltage and current. Some can convert single-phase power to three-phase power and vice versa. Variations can input or output DC power to reduce the number of conversions, for greater end-to-end efficiency. A Modular Solid-state transformer consists of several high-frequency transformers and is similar to a Multi-level converter. As a complex electronic circuit, it must be designed to withstand lightning and other surges. Solid-state transformer is an emerging technology.

References

  • "Are Solid-State Transformers Ready for Prime Time?".
  • "Solid State Transformer For Power Distribution Applications" (PDF).