Boat building industry in Ontario
Boat building has been a part of the history of Ontario, Canada for thousands of years. From the hand-crafted birch bark canoes of the indigenous people to modern factory-built speedboats, the construction of small boats for fishing, transportation and later water sports has been a widespread commercial activity in the province.[1]
History
A study of the geography of the province reveals the presence of over 250,000 lakes and a large number of connecting waterways. About 17% of the area inside the province's boundaries is covered by water.[2] Until European settlers began constructing road systems, beginning in the late 1700s, most of what is now Ontario was covered with dense forest. Aside from footpaths through the woods, travel by water was the only practical choice.
Bark Canoes
The vehicle of choice for indigenous travelers was the bark canoe, a light wooden frame covered with bark, usually from the birch tree.[3] The dugout canoe, popular in other areas of Canada, found limited use in this area; it was too heavy to be easily lifted over river rapids, and was also more time-consuming to construct.[4]
The frames of the bark canoes were usually made of cedar, which was soaked in water to make it flexible, and then bent into shape. The frame pieces were tied together with boiled white pine roots. The frame was then covered with sections of birch bark, and the seams sealed with spruce or pine gum. Canoe-making skills were passed from generation to generation,[3] and the boats were made in a variety of sizes and shapes.[5]
When Europeans first came to the area, their large boats were not suitable for the untamed waterways, and the bark canoe was adopted for inland travel. Explorers and traders purchased or traded for canoes from aboriginal builders, and also began building their own in centres along popular trade routes, including at Fort William.[6] Canoes continued to be the main means of inland water transportation until about 1820.[3] One builder was L. A. Christopherson, who built canoes for the Hudson's Bay Company for 40 years.[7] In areas where birch bark was scarce, canvas began to be used instead, both by traders and native boat builders.[7]
Birch bark canoes are still hand made today by individual craftsmen.
Wooden Boats
With the building of sawmills along the many rivers, European boat building methods began to be adopted. Canoes, rowboats, skiffs, and other small boats began to be made with wooden planks, often of cedar, which resists rotting better than most other types of wood.[8]
Canoes made of wooden planks instead of bark, called "board canoes" first began to appear in the 1850s, although it is not known which craftsman was the first to combine the native boat designs with "modern" technology of sawn and planed boards.[9] In 1882, the Gidley Boat Works began manufacturing wooden plank boats on the shores of Georgian Bay.
One early builder of board or "cedar strip" canoes was Tom Gordon of Lakefield, near Peterborough.[10] Over time, a number of boat-building companies grew up in the Peterborough area;[11] one was the Peterborough Canoe Company. A long-time builder of plank-built boats was John William Stone, who set up a business building rowboats at Rat Portage (Kenora) in 1897. By 1906 the Stone Boat Company was also building duck boats, sailing canoes, ice boats, rowing shells, and barges.[12]
Beginning in the early 1900s, with the advent of gasoline engines, and the building of canals and locks to make rivers more navigable, many Ontario companies began producing wooden power boats. These were built from wide planks and shaped for speedy travel.[13][14] In 1920, the Gidley Boat Works on Georgian Bay was taken over by Arthur Grew, who enlarged the company, renaming it Grew Manufacturing.
The Muskoka region was particularly known for its wooden speedboats.[15] Early builders of these boats were Johnson of Port Carling and Ditchburn Boats;[16][17][18] other companies were Minett-Shields, Greavette and Duke.[13] The boats were often used for pleasure trips, fishing, and water sports, as well as transportation on Ontario's many lakes, rivers and canals. Today these boats are restored by hobbyists and valued as collectors' items.
Fibreglass
In the 1950s fibreglass began to be used in boat construction, first as a waterproof covering for wooden boats, and later formed into complete boat hulls. [19] By the 1960s there were a number of companies making fibreglass sailboats near the shores of Lake Ontario, including Oakville's Grampian Marine, and Hinterhoeller Yachts and C & C Yachts in Niagara-on-the-Lake.[20] A company called Peterborough Boats, later bought by Princecraft, built fibreglass boats in Peterborough. Another company, Rossiter Boats, set up in Markdale in 1974,[1] and Grew Manufacturing switched much of its output to fibreglass boats.
Aluminum
In 1974 Temagami Boat Manufacturing of Vermillion Bay bought the rights to build a line of aluminum fishing boats, Naden Boats, which had previously been made in the United States, and set up a factory. [21] In 1986, the Duhamel and Dewar families in Sudbury began to manufacture under the name Legend Boats, choosing aluminum for its durability in the rugged terrain of the area; They later began to manufacture aluminum pontoon boats.[1] In 1988, Connor Industries began manufacture of aluminum boats in Parry Sound under the Stanley brand.[22][23] The company both imports and assembles parts, and builds special purpose boats for government and industry.[24]
Present day industry
Over time, the construction of modern roads and railways meant that small boats were mainly used for recreation, although in more remote areas they are still needed for transportation. In the late 2000s, a serious economic recession in North America left consumers with little money to spend on recreation. At the same time, the exchange rate between the Canadian and American dollar soared, making it expensive to buy raw materials and imported parts for boats. Many large longstanding companies went out of business, including Grew Manufacturing[25] and Naden Boats, while some smaller companies, including Rossiter, Stanley and Legend, survived.[1] With little sales activity, many companies turned their attention to updating their manufacturing processes and model designs, leading to a flurry of new offerings once the economic recovery began.[26]
In 2018, after the United States imposed stiff tariffs on imports of steel and aluminum, Canada retaliated by placing a 10% tariff on the import of watercraft from the United States. This had a negative effect on companies which, like Legend, import American boats and boat parts.[22]
References
- ^ a b c d "Riding the waves: Canadian boat builders are on the rebound". Cottage Life, By Douglas Hunter. June 12, 2017
- ^ "Water Resources", Ontario Ministry of Natural Resources
- ^ a b c "Birchbark Canoe", The Canadian Encyclopedia
- ^ Rogers, Edward S., "The Dugout Canoe in Ontario", American Antiquity Vol. 30, No. 4 (April 1965), pp. 454-459, Society for American Archaeology
- ^ Edwin Tappan Adney; Howard I. Chappelle (27 October 2015). The Bark Canoes and Skin Boats of North America. Smithsonian. ISBN 978-1-58834-522-6.
- ^ Fort William Historical Park: Canoes
- ^ a b Roy MacGregor (10 May 2016). Canoe Country: The Making of Canada. Random House Canada. pp. 231–232. ISBN 978-0-307-36142-4.
- ^ Ontario Historical Society (1975). Ontario History. Kraus Reprint Company. p. 101.
- ^ Brown, Ken, The Canadian Canoe Company & the early Peterborough canoe factories, 2011.
- ^ Francis, Daniel, I Remember...An Oral History of the Trent-Severn Waterway. 1984, 0-969-1726-0-5
- ^ Material History Review. Vol. Issues 53-56. National Museum of Science and Technology = Musée national des sciences et de la technologie. 2001. p. 79.
{{cite book}}
:|volume=
has extra text (help) - ^ "Building Stone Boats". Boats, Lake of the Woods Museum, Vol. 91 No. 3 by Lori Nelson
- ^ a b A. H. Duke; William Gray (July 2004). The Boatbuilders of Muskoka. Boston Mills Press. ISBN 978-1-55046-074-2.
- ^ Ontario History. Vol. 82. Ontario Historical Society. 1990. p. 92.
- ^ Eric H. Boehm (1999). America, History and Life. Clio Press. p. 48.
- ^ Ray Love (9 May 2018). Muskoka Ontario's Playground: A History of Recreation and Sport in Ontario's Cottage Country 1860-1945. FriesenPress. p. 16. ISBN 978-1-5255-2622-0.
- ^ Harold Shield (2003). Ditchburn Boats: A Muskoka Legacy. Boston Mills Press. ISBN 978-1-55046-412-2.
- ^ James P. Barry. American Powerboats: The Great Lakes' Golden Years 1882-1984. Voyageur Press. p. 121. ISBN 978-1-61060-608-0.
- ^ Material History Review. Vol. 39–44. National Museum of Science and Technology = Musée national des sciences et de la technologie. 1994. p. 13.
- ^ Daniel Spurr (December 1999). Heart of Glass: Fiberglass Boats and the Men who Made Them. International Marine/ McGraw-Hill. p. 2010. ISBN 978-0-07-157983-4.
- ^ "Naden reaches one year mark with top production". The Dryden Observer. 8 May 1975.
- ^ a b "Canadian boat makers ride wave of lower loonie". The Globe and Mail, JOSH O'KANE. August 29, 2016
- ^ "Ontario boating industry to feel the sting of retaliatory Canadian tariffs on U.S. watercraft". CBC News · June 25, 2018
- ^ "Success of Parry Sound Connor Industries reaches beyond Canadian shores". Aug 02, 2017 by Andrew Hind. Parry Sound North Star.
- ^ "Grew Manufacturing now in receivership". Boat Industry News
- ^ "Just Launched: A look at the new wave of boat models for 2018". Jan 26, 2018 by Craig Ritchie Parry Sound North Star.