Search results

flight, or a motorcycle in motion), then oil cooling is an ideal way to cope with those times when extra cooling is needed (such as an aero-engine taxiing...

is most common for engine and transmission cooling and top airflow most common for air conditioner cooling. Automobile radiators are constructed of a...

components. Other uses include the cooling of lubricant oil in pumps; for cooling purposes in heat exchangers; for cooling buildings in HVAC and in chillers...

cooling Evaporative cooling Water cooling Oil cooling Heat pipe cooling Peltier cooling Heater core ericsson.net – Forced air cooling of DC/DC power modules...

by actively exhausting hot air. There are also other cooling techniques, such as liquid cooling. All modern day processors are designed to cut out or...

engine cooling uses either air or liquid to remove the waste heat from an internal combustion engine. For small or special purpose engines, cooling using...

Transformer oil, a type of insulating and cooling oil used in transformers and other electrical equipment, needs to be tested periodically to ensure that...

A cooling tower is a device that rejects waste heat to the atmosphere through the cooling of a coolant stream, usually a water stream, to a lower temperature...

fluid bearings and also assists in cooling the engine. As well as its primary purpose for lubrication, pressurized oil is increasingly used as a hydraulic...

hottest part of the engine and require adequate cooling, typically air cooling, oil cooling or liquid cooling. Some motorcycles such as Harley-Davidsons,...

refrigerant. Air is a common form of a coolant. Air cooling uses either convective airflow (passive cooling), or a forced circulation using fans. Hydrogen...

displacement/start-stop cylinder deactivation, and variable-pressure oiling system with piston-cooling oil jets. All versions were to come equipped with the GM 10L90...

remote mounted oil filter (Away from block on exhaust side engine mount) and a windage tray. For the B230 engines 1993, piston cooling, oil squirting jets...

in oil cooling, for instance in electric transformers. Heat transfer oils are used both as coolants (see oil cooling), for heating (e.g. in oil heaters)...

engine modifications to extend life and reliability included under-piston cooling oil squirters, thicker connecting rods and other components. Also of note...

or reverse osmosis of seawater Cooling medium - to cool gas and oil streams; comprising either seawater (direct) cooling or a fresh water/glycol mixture...

peanut oil, used in the preparation of food for a company (Mitr Kp IV/52) in Ramiswil, canton of Solothurn, was mixed with machine gun cooling oil by mistake...

Mineral oil is used as the principal fuel in some types of gel-type scented candles. It is used for cooling, such as in the liquid submersion cooling of components...

evaporative cooling can still take advantage of the evaporative cooling process without increasing humidity. Passive evaporative cooling strategies can...

Immersion cooling is an IT cooling practice by which complete servers are immersed in a dielectric, electrically non-conductive fluid that has significantly...