Search results
Did you mean: flat spindle
The page "Float-spindle" does not exist. You can create a draft and submit it for review or request that a redirect be created, but consider checking the search results below to see whether the topic is already covered.
- machine tools, a spindle is a rotating axis of the machine, which often has a shaft at its heart. The shaft itself is called a spindle, but also, in shop-floor...6 KB (667 words) - 03:17, 17 April 2024
- Myth of Er (redirect from Spindle of Necessity)one's advantage. The myth mentions "The Spindle of Necessity", in that the cosmos is represented by the Spindle attended by sirens and the three daughters...13 KB (1,770 words) - 13:54, 3 May 2024
- Bicycle pedal (section Float and tension)the leg to turn the bottom bracket spindle and propel the bicycle's wheels. A pedal usually consists of a spindle that threads into the end of the crank...24 KB (3,057 words) - 10:24, 29 April 2024
- Spindle turning, or turning between centers, is a woodturning method referring to a piece of wood on a wood lathe that is being turned on its center axis...1 KB (151 words) - 13:04, 20 January 2021
- Sometimes, especially on bicycles, the latter type of axle is referred to as a spindle. On cars and trucks, several senses of the word axle occur in casual usage...14 KB (2,005 words) - 12:43, 27 December 2023
- Tap and die (section Heads for machine tool spindles)shape. Its spindle is thus held accurately perpendicular to the work. Standard taps are held in the spindle, and the operator turns the spindle manually...31 KB (3,471 words) - 20:43, 30 May 2024
- Speeds and feeds (redirect from Spindle speed)(e.g., in turning and boring), the units are almost always distance per spindle revolution (inches per revolution [in/rev or ipr] or millimeters per revolution...31 KB (4,305 words) - 03:10, 4 February 2024
- control of flow. The flow can be controlled and regulated with the use of a spindle. A needle valve has a relatively small orifice with a long, tapered seat...4 KB (544 words) - 18:10, 31 January 2024
- axis parallel to the bed, called the spindle. Spindles are often hollow and have an interior Morse taper on the spindle nose (i.e., facing to the right /...42 KB (5,702 words) - 19:12, 4 May 2024
- Bow drill (redirect from Bow spindle)drill is a simple hand-operated type of tool, consisting of a rod (the spindle or drill shaft) that is set in rapid rotary motion by means of a cord wrapped...5 KB (564 words) - 11:33, 4 May 2024
- machine taper is a system for securing cutting tools or toolholders in the spindle of a machine tool or power tool. A male member of conical form (that is...41 KB (5,157 words) - 07:20, 9 May 2024
- woodworking float (more rarely used in silversmithing), also called a planemaker's float, is a tapered, flat, single cut file of two types: edge float and the...2 KB (244 words) - 22:11, 4 November 2022
- fuel between the jet and the float level. Any sloshing within the float chamber affected this. Fish's design kept the float chamber, but avoided the dependency...7 KB (888 words) - 16:56, 17 December 2023
- A spindle, in furniture, is a cylindrically symmetric shaft, usually made of wood. A spindle is usually made of a single piece of wood and typically has...2 KB (174 words) - 02:22, 29 August 2023
- Wood shaper (redirect from Spindle moulder)North America or spindle moulder in the UK and Europe), is a stationary woodworking machine in which a vertically oriented spindle drives one or more...7 KB (837 words) - 06:52, 30 November 2023
- its centre that sits halfway between the wheels, which may be mounted on spindles. A round plate with a hole in its centre is located on the underside of...3 KB (329 words) - 09:51, 24 April 2024
- Surface marker buoy (redirect from Dive-float)A surface marker buoy, SMB, dive float or simply a blob is a buoy used by scuba divers, at the end of a line from the diver, intended to indicate the...33 KB (4,363 words) - 03:20, 24 February 2024
- cannon, into which slag can float during casting. If the object is to be hollow, a straw rope is wound around the spindle and covered in a friable material...2 KB (370 words) - 15:08, 30 March 2024
- tool with a flat base and a rotating blade extending past the base. The spindle may be driven by an electric motor or by a pneumatic motor. It routs (hollows...18 KB (2,692 words) - 16:52, 29 November 2023
- needles, needle cases, thimbles, pens, chessmen, spinning tops; legs, spindles, and pegs for furniture; balusters and newel posts for architecture; baseball...32 KB (4,708 words) - 16:03, 19 March 2024
- movement of the float c actuates two arms b, b, which are attached to the float spindle a, and which depresses this float spindle until the conical
- human race. Father: [Burp!] How's that? Mother: You're grotesque! Bob Spindler: [after the man claims Bob was responsible for his having a serious accident
- wrapped around the drill, with the bow and spindle at right angles to each other. The end of the spindle is placed on a fireboard. The fireboard is a