Search results
The page "Surfacing-lathe" does not exist. You can create a draft and submit it for review or request that a redirect be created, but consider checking the search results below to see whether the topic is already covered.
A lathe (/leɪð/) is a machine tool that rotates a workpiece about an axis of rotation to perform various operations such as cutting, sanding, knurling...42 KB (5,737 words) - 03:56, 31 October 2024- In machining, a metal lathe or metalworking lathe is a large class of lathes designed for precisely machining relatively hard materials. They were originally...35 KB (5,055 words) - 14:48, 12 June 2024
A rose engine lathe is a specialized kind of geometric lathe. The head stock rocks back and forth with a rocking motion and/or slides along the spindle...3 KB (395 words) - 16:26, 27 December 2023
lathed object is a 3D model whose vertex geometry is produced by rotating the points of a spline or other point set around a fixed axis. The lathing may...1 KB (175 words) - 09:19, 7 April 2023
Turning (category Lathes)a traditional form of lathe, which frequently requires continuous supervision by the operator, or by using an automated lathe which does not. Today the...15 KB (2,047 words) - 08:45, 11 September 2024
A lathe dog is a mechanical device typically made of cast iron, steel or aluminum that transmits rotary motion from a faceplate to a workpiece mounted...3 KB (408 words) - 08:10, 4 September 2024
A pole lathe, also known as a springpole lathe, is a wood-turning lathe that uses the resilience of a long pole as a return spring for a treadle. Pressing...4 KB (639 words) - 21:48, 12 May 2023
Woodturning (redirect from Turner's lathe)using a wood lathe with hand-held tools to cut a shape that is symmetrical around the axis of rotation. Like the potter's wheel, the wood lathe is a mechanism...32 KB (4,709 words) - 09:03, 8 October 2024- A lathe center, often shortened to center, is a tool that has been ground to a point to accurately position a workpiece on an axis. They usually have...8 KB (1,068 words) - 06:04, 9 June 2024
motion against the tool. Lathes are the principal machine tool used in turning. Boring involves the machining of an internal surface of a hole to increase...21 KB (2,763 words) - 21:06, 10 November 2024
Chuck (engineering) (redirect from Lathe chuck)drill, a mill and a transmission, a chuck holds the rotating tool; in a lathe, it holds the rotating workpiece. Chucks commonly use jaws to hold the tool...33 KB (4,302 words) - 06:05, 9 June 2024
describe repetitive roughness profiles, such as those produced by turning on a lathe. Other "frequency" parameters are Sm, λ {\displaystyle \lambda } a and λ...35 KB (3,727 words) - 11:06, 6 November 2024- Facing (machining) (section Facing lathe operation)are not labeled by the term "facing." Facing on the lathe uses a facing tool to cut a flat surface perpendicular to the work piece's rotational axis. A...3 KB (464 words) - 03:28, 20 October 2024
Speeds and feeds (redirect from Surface speed)desired surface speed (sfm or m/min) and incorporating the diameter (of workpiece or cutter). The spindle may hold the: Material (as in a Lathe chuck)...31 KB (4,312 words) - 20:36, 15 September 2024
Boring (manufacturing) (section Lathes)builders. Lathe boring is a cutting operation that uses a single-point cutting tool or a boring head to produce conical or cylindrical surfaces by enlarging...13 KB (1,910 words) - 14:43, 21 January 2024
Producing surfaces perpendicular to the workpiece axis is called facing. Producing surfaces using both radial and axial feeds is called profiling. A lathe is...39 KB (4,691 words) - 21:41, 29 October 2024- Straight line engine turning (category Lathes)patterns on a surface. The engraving may be referred to as Guilloché, which also encompasses patterns created with the rose engine lathe. Where the rose...1 KB (125 words) - 18:06, 13 December 2023
- and has the ability to set up tools such as milling machines, grinders, lathes, and drilling machines.[clarification needed] A competent machinist should...14 KB (1,683 words) - 00:45, 11 November 2024
- in feet-per-minute as the spindle of a milling machine or lathe. 1 SFM equals 0.00508 surface meter per second (meter per second, or m/s, is the SI unit...3 KB (407 words) - 00:41, 19 June 2024
can be a pair of flat surfaces designed to allow motion; e.g., a drawer and the slides it rests on or the ways on the bed of a lathe. Plain bearings, in...36 KB (3,613 words) - 22:21, 3 August 2024
- The standard “self-acting sliding, surfacing and screw-cutting lathe” is essentially the standard turning lathe, with the addition of the screw-cutting
- While still attending school he worked of his own accord at the bench and lathe, on Sundays he attended the Trade School to practise geometrical drawing
- corrected by lathing or shaving. Some wheels have a particularly bad wobble that can set up vibrations even when the wheels are lathed, balanced and