Search results
Appearance
The page "Valve spindle" does not exist. You can create a draft and submit it for review or request that a redirect be created, but consider checking the search results below to see whether the topic is already covered.
- throttle valve spindle respectively. The pilot valves spindle is also connected to the same lever at some intermediate position. Both the pilot valves cover...7 KB (988 words) - 17:51, 5 January 2023
- opening and closing a valve orifice machined into the valve body, by turning the valve knob to drive the valve spindle which moves the valve seat towards or...47 KB (5,214 words) - 17:14, 2 September 2024
- needle valve uses a tapered pin to gradually open a space for fine control of flow. The flow can be controlled and regulated with the use of a spindle. A...4 KB (544 words) - 18:10, 31 January 2024
- rotary valve works using a short circular rotor (also known as a stock, or "plug") housed in a larger cylindrical valve casing, and rotating on a spindle. Elbow-shaped...13 KB (1,465 words) - 11:48, 2 August 2024
- Willans engine (redirect from Central valve engine)features of single-acting cylinders and a central spindle valve shared between all the cylinders of that spindle. The cylinders are arranged as tandem compounds...17 KB (1,803 words) - 14:50, 18 October 2023
- the valve spindles. Whilst working for the Great Western Railway at Swindon Works, Holcroft schemed out and patented (in 1909) a conjugated valve gear...7 KB (989 words) - 02:22, 8 June 2021
- piston valve: two valve pistons with sealing rings, carried on a valve spindle driven by the valve gear. The difference with a Trofimoff valve is that...5 KB (672 words) - 19:59, 19 May 2017
- that in turn drove a strap and a long rod to the valve's actuating spindle. This was a simple valve gear but worked well for rotative engines that ran...8 KB (1,093 words) - 00:10, 25 June 2024
- central D-sectioned piston. This valve worked by "connecting the upper and lower valves so as to be worked by one rod or spindle, and in making the stem or...3 KB (325 words) - 04:36, 28 June 2024
- the 1980s. The Thayer Valve uses a conical rotor (although the 1978 patent and early prototypes were cylindrical), with its spindle rotation axis parallel...8 KB (997 words) - 22:14, 16 June 2024
- enabling a locomotive to move under its own power. The valve consists of two piston heads on a common spindle moving inside a steam chest, which is essentially...8 KB (1,049 words) - 10:28, 30 June 2022
- conjugated valve gear derived the motion of the inside valve spindle from the two outside valve spindles: this eliminated an inaccessible middle set of valve gear...44 KB (5,179 words) - 13:56, 27 July 2024
- movement is translated into the horizontal movement required by the valve spindle by a die block moving in a slide which can be varied in inclination...5 KB (510 words) - 19:44, 29 March 2024
- eccentrics) instead of concave. Gooch valve gear had the disadvantage of angularity between the valve spindle and the eccentric rod in full gear, whereas...14 KB (1,942 words) - 15:22, 6 December 2023
- opposite end of the valve spindles from the valve gear, as the valve spindles lengthened with the heat of steam in the cylinders the valve timing would be...11 KB (1,503 words) - 04:35, 9 August 2024
- monitor the throttle body valve position for the ECU of an engine. The sensor is usually located on the butterfly spindle/shaft, so that it can directly...4 KB (531 words) - 00:19, 25 April 2024
- A rotary valve (also called rotary-motion valve) is a type of valve in which the rotation of a passage or passages in a transverse plug regulates the flow...17 KB (1,948 words) - 05:43, 10 July 2024
- failure of the unusual derived motion design. The valve gear was insufficiently robust and the valve spindle guides (originally cast iron) had to be replaced...7 KB (597 words) - 21:58, 13 July 2024
- Euonymus (redirect from Spindle-tree)species and between different English-speaking countries, but include spindle (or spindle tree), burning-bush, strawberry-bush, wahoo, wintercreeper, or simply...8 KB (453 words) - 12:29, 8 May 2024
- Cylinder (locomotive) (section Valve gear)by means of a rocking shaft from the first cylinder's valve spindle since the required valve events at the second cylinder are a mirror image of the first...10 KB (1,359 words) - 03:40, 8 May 2024
- rectifications are made by slight alterations to the lengths of the valve spindles or eccentric rods. It should, however, be pointed out that it is impossible
- with a new one. Examine the valve seat and repair or replace it with a new one, if necessary, before replacing the spindle; otherwise, a new washer provides