A36 steel
§A36 steel is a standard steel alloy that is a common structural steel in the United States.[1] The A36 standard was established by the standards organization ASTM International.
Properties
As with most steels, A36 has a density of 7,800 kg/m3 (0.28 lb/cu in). Young's modulus for A36 steel is 200 GPa (29,000,000 psi).[2] A36 steel has a Poisson's ratio of 0.26, and a shear modulus of 75 GPa (10,900,000 psi).
A36 steel in plates, bars, and shapes with a thickness of less than 8 in (203 mm) has a minimum yield strength of 36,000 psi (250 MPa) and ultimate tensile strength of 58,000–80,000 psi (400–550 MPa). Plates thicker than 8 in have a 32,000 psi (220 MPa) yield strength and the same ultimate tensile strength of 58,000–80,000 psi (400–550 MPa).[1] The Electrical Resistance of A36 is 0.0000153 ohm/cm. A36 bars and shapes maintain their ultimate strength up to 650°F. Afterward, the minimum strength drops off from 58,000 psi: 54,000 psi at 700°F; 45,000 psi at 750°F; 37,000 psi at 800°F.
Usage
Fabricated forms
A36 is produced in a wide variety of forms, including:
- Plate
- Structural Shapes
- Bar
- Sheet
- girders
- angle iron
- t iron
Methods of joining
A36 is readily welded by all welding processes. As a result, the most common welding methods for A36 are the cheapest and easiest: shielded metal arc welding (SMAW, or stick welding), gas metal arc welding (GMAW, or MIG welding), and oxyacetylene welding. A36 steel is also commonly bolted and riveted in structural applications.
See also
References
- ^ a b Steel Construction Manual, 8th Edition, second revised edition, American Institute of Steel Construction, 1986, ch. 1 pages 1–5.
- ^ "MatWeb A36 steel bar". MatWeb. Retrieved 21 January 2012.