Jump to content

Allen Scythe

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Yadsalohcin (talk | contribs) at 19:29, 3 March 2018 (Revising/ recovering refs). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Allen Scythe with rotary saw attachment preserved at Didcot Railway Centre, England

The Allen Scythe, sometimes called the Allen Power Scythe, is a petrol-powered finger-bar mower. It was made from 1935 until 1973 by John Allen and Sons in Cowley, Oxfordshire. The company, formerly the Eddison and Nodding Company, was bought in 1897 by John Allen, who renamed it the Oxford Steam Plough Company, and then renamed it to John Allen and Sons.[1][2]

Description

The Allen Scythe does not resemble a hand scythe but serves the same purpose. The engine drives a 2-foot-wide (0.6 m) or 3-foot-wide (0.9 m) or 4ft wide toothed blade sliding back and forth horizontally across stationary teeth to produce a scissor action, and also drives two large wheels for forward travel. There are handles to allow the machine to be controlled by an operator walking behind it, controls comprise throttle and clutch. Separate ratchets allow either one or both wheels to be driven. In normal use only one is engaged so that turning is easier. The machines are extremely robust and many from the 1950s are still in regular use. They can be dangerous, as the clutch system only disengages the wheel drive from the engine: the blades cut all the time the engine runs.

Later models were available with different attachments, including rotating brushes that replaced the cutting head, air or water pumps and saws or hedge trimmers that drove from the starting pulley side of the engine.

Engine

John Allen and Sons used a number of engine types, the most common being a Villiers two-stroke with magneto ignition and rope start. The engines may fail to start because of ignition problems. The spark should occur when the piston is 3/16 of an inch before top dead centre (TDC) on all Villiers engines except for the Villiers Mk. 11C & 25C which should spark 5/32 of an inch before TDC.[3]

Episode 6 of the BBC Two reality television series Wartime Farm featured an Allen Scythe. Cast members Alex Langlands and Peter Ginn used it to harvest hay in a churchyard.[citation needed][4]

References

  1. ^ Edbury, Christine (January 2012). "Aerial Photographs: Major Allen's Life and Work (1891–1940)". British Archaeology at the Ashmolean Museum: Rationalisation and Enhancement of the Historic Collections. Ashmolean Museum. Retrieved 19 October 2014.
  2. ^ Christine Edbury: Highlights of the British Collection: Aerial Photographs - Major Allen's Life and Work (1891-1940). January 2012 at britisharchaeology.ashmus.ox.ac.uk Accessed 3 March 2018
  3. ^ Allen Scythe User Manual and Villiers 25C Operating Instructions at coalcanal.org Accessed 3 March 2018
  4. ^ Episode 6 Wartime Farm "...use some clever 1940s technology..." at bbc.co.uk Accessed 3 March 2018

Further reading

  • Brown, Jonathan (2012). Allen's of Oxford. Road Locomotive Society. ISBN 0950848050.