Ampere-hour
Top: AA battery (2500 mA·h)
Bottom: AAA battery (1000 mA·h)
An ampere hour or amp hour (symbol Ah; also denoted A·h or A h) is a unit of electric charge, having dimensions of electric current times time, equal to the charge transferred by a steady current of one ampere flowing for one hour, or 3600 coulombs.[1] The commonly seen milliampere hour (mAh or mA·h) is one-thousandth of an ampere hour (3.6 coulombs).
Use
The ampere hour is frequently used in measurements of electrochemical systems such as electroplating and incorrectly, the capacity of electrical batteries (a battery constituent material's specific capacity is commonly expressed in mA·h/g). The latter is commonly used for marketing purposes, but it does not express the real capacity of a battery.[citation needed]
A milliampere second (mA·s) is also a unit of measure used in X-ray imaging, diagnostic imaging, and radiation therapy. This quantity is proportional to the total X-ray energy produced by a given X-ray tube operated at a particular voltage.[2] The same total dose can be delivered in different time periods depending on the X-ray tube current.
An ampere hour is not a unit of energy. In a battery system, for example, accurate calculation of the energy delivered requires integration of the power delivered (product of instantaneous voltage and instantaneous current) over the discharge interval. Generally, the battery voltage varies during discharge; an average value or nominal value may be used to approximate the integration of power.[3]
Other measures of electric charge
The Faraday constant is the charge on one mole of electrons, approximately equal to 26.8 ampere hours. It is used in electrochemical calculations.
Examples
- An AA size dry cell has a capacity of about 2 to 3 ampere hours.
- Automotive car batteries vary in capacity but a large automobile propelled by an internal combustion engine would have about a 50 ampere hour battery capacity.
- Since one ampere hour can produce 0.336 grams of aluminium from molten aluminium chloride, producing a ton of aluminium requires transfer of at least 2.98 million ampere hours. [4]
See also
References
- ^ "Full Conversion Table (sorted by Category)" Allmeasures.com, 2013, webpage: AM-Conversion-table.
- ^ X-ray Safety Handbook, 9.0 Terms and Definitions, VirginiaTech Environmental, Health and Safety Services Archived July 23, 2007, at the Wayback Machine
- ^ National Research Council (U.S.) (2004). Meeting the energy needs of future warriors. National Academies Press. p. 27. ISBN 0-309-09261-2.
- ^ T. L. Brown, H. E. Lemay Jr, "Chemistry the Central Science", Prentice-Hall, 1977 ISBN 0-13-128769-9 page 562