Jump to content

Astroscan

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by StarryGrandma (talk | contribs) at 21:25, 15 November 2016 (Design: found archive page for dead link). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

An Astroscan wide-field Newtonian reflector.

The Astroscan was a wide-field 4⅛" clear-inch (105mm) diameter reflecting telescope, originally produced by the Edmund Scientific Corporation, that was for sale from 1976 to 2013.

Design

The Astroscan had a Newtonian reflector layout with a 4⅛" clear-inch (105mm) diameter f/4.2 aluminized and overcoated borosilicate glass parabolic primary mirror with a focal length of 17½ inches (445mm).[1] The telescope's secondary mirror was mounted on a flat optical window at the front of the tube. The telescope was designed by Norman Sperling and Mike Simmons to be used as an introductory telescope.[2] Rather than using a more traditional equatorial or altazimuth mount the Astroscan features a spherical housing around the primary reflector which sat in a cast aluminum cradle. The design was durable and allowed for simple operation by novice amateur astronomers; it won an Industrial Design Award in 1976.[1] The telescope body was made from high impact acrylonitrile butadiene styrene (ABS) plastic and was equipped with a carrying strap to aid portability.

Because it was targeted at the novice market the telescope had its limitations: The general design was for low power hand-held or wide-angle work, the short f/4 focal ratio did not allow for high magnification without the image degrading,[3] and the primary mirror was factory aligned with no provisions for adjustment. The Astroscan came with 15 mm and 28 mm focal length Plössl eyepieces, giving it a magnification of 30X and 16X respectively, with a 3.0° field of view using the 28 mm eyepiece, and a 1.6° with the 15 mm.[1]

History

When Edmund Scientific introduced the telescope in 1976 they called it "The Edmund Wide-Field Telescope" with a Part Number "2001"[4] Edmund had a public contest which ran until November 15, 1976 to come up with a name.[5] The winning name was "Astroscan 2001". The "2001" part of the name was dropped over time.

The Astroscan continued to be available after Edmund Scientific was acquired by Science Kit and Boreal Laboratories in 2001 with the telescope for sale on the "Edmund Scientific" website. Production and sales of the telescope ceased in 2013 when the mold for the plastic body broke. In 2016 the Edmund Scientific website, now called Scientifics Direct, began offering a more common format altitude-azimuth mounted 4.5 inch table-top Newtonian telescope labeled the "Astroscan Millennium". There are reports of a Kickstarter campaign by one of the original Astroscan creators to fund production of a new version based on the original Astroscan telescope.[6] Scientifics Direct will be reintroducing the original Astroscan design in early 2017.[citation needed]

See also

References

  1. ^ a b c "Edmund Scientific: Astroscan Telescope". Edmund Scientific Corporation. Archived from the original on 4 July 2008.
  2. ^ "Astroscan Memories". Everything in the Universe.
  3. ^ Harrington, Phillip S. (2002). Star Ware: The Amateur Astronomer's Ultimate Guide to Choosing, Buying, and Using Telescopes and Accessories. John Wiley and Sons. p. 116. ISBN 0-471-41806-4.
  4. ^ Edmund Wide-Field Telescope manual, published September 1976, Edmund Scientific Company, Barrington NJ, CLOUDY NIGHTS FORUM ARCHIVES, Equipment Discussions >> Classic Telescopes, Edmund Scientific 4.25" WF Pre-Astroscan Serial #? catalog images
  5. ^ Piers Anthony, How Precious Was That While, Macmillan - 2002, page 372
  6. ^ zicos.com, Help kickstart this fantastic, easy-to-use telescope Wednesday April 20, 2016