Jump to content

Attenuation-to-crosstalk ratio

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Kvng (talk | contribs) at 13:21, 16 January 2014 (link to Category 6 cable. a bit cleaner and still a stub.). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Attenuation-to-crosstalk ratio (ACR) is a parameter that is measured when testing a communication link, which represents the overall performance of the cable.[1] ACR is a mathematical formula that calculates the ratio of attenuation to near-end crosstalk for each combination of cable pairs.[2] ACR is expressed as a figure in decibels (dB), between the signal attenuation produced by a wire or cable transmission medium and the near-end crosstalk (NEXT).[3] In order for a signal to be received with an acceptable bit error rate, the attenuation and the crosstalk must both be minimized.[3] Crosstalk can be reduced by ensuring that twisted-pair wiring is tightly twisted and is not crushed, and by ensuring that connectors between wire and cable media are properly rated and installed.[3]

Positive ACR calculations mean that transmitted signal strength is stronger than that of near-end crosstalk.[4] ACR can be used to define a signal bandwidth (e.g. 250 MHz for category 6 cable) where signal to noise ratios are sufficient to support certain applications.[4] The maximum frequency for which positive ACR is assured provides a benchmark to assess the usable bandwidth of twisted-pair cabling systems.[4] EIA/TIA specifies specific values for ACR in order to meet the various categories of cable.[5]

See also

References

  1. ^ [1], Learning Path: Testing network cable.
  2. ^ [2], Testing Copper Cabling the Right Way.
  3. ^ a b c [3], attenuation-to-crosstalk ratio (ACR) or headroom.
  4. ^ a b c [4], De-Mystifying Cabling Specifications - Important Definitions.
  5. ^ CAT 6 Testing Requirements


Stub icon

This article related to telecommunications is a stub. You can help Wikipedia by expanding it.

Retrieved from "https://en.wikipedia.org/w/index.php?title=Attenuation-to-crosstalk_ratio&oldid=590963247"