Australian experimental light tank
The Australian Experimental light tank (AELT, and also known as "Chassis 160") was a prototype light tank built by Australia on a local pattern carrier hull during World War II.
It was one of two indigenously developed tank designs, the other being the cruiser Sentinel tank.
While the LP1 Chassis 160 was developed into a light tank prototype, and the Sentinel and Thunderbolt were put into production, none of these saw combat.
Background
Australia in 1941 saw the need to produce its own military vehicles, as their normal source, the United Kingdom, could not spare the vehicles because of their own war effort needs. This saw Australia produce a number of armoured cars, and both a light tank and several cruiser tanks. The first effort to create a tank in Australia was the assembly of a light tank, in 1941.
160 Carrier, MG (Aust) No.1 or LP1 were built with the last two, number 159 and 160, being experimental vehicles for developing the LP2 carriers. Number 160 being formally identified as "MG Carrier LP1 Track Displacement-Closed Front".[1]
Chassis 160 was subsequently rebuilt into a light tank with new suspension and a rudimentary cylindrical turret on top of the body for testing. The tank as constructed, however, was found to be completely unmanoeuvrable and a total failure.[2] The project was promptly terminated.[3]
Plans were drawn up for the tank to be armed with a 2 pounder gun, a 6 pounder gun, and later, when it was started to be produced in Australia, the 25 pounder gun-howitzer[4][unreliable source?] much like the AC3 Thunderbolt. The tank would have been able to achieve a speed of about 48 kph.[4] The tank was of welded construction, with the envisaged turret of a similar polygonal shape to the Crusader tank and the Rhino Heavy Armoured Car.[citation needed] Like the Rhino, the armour thickness was 30mm.[citation needed] Little else is known about the tank.
With increased tank production overseas Australia was able to get access to US-built tanks, and British Matilda II tanks became available after being replaced in British service by later tanks, such as the Churchill.
Visually, the light tank is based on local pattern carrier components,[5] with four wheels per side individually sprung on a Watt's linkage. The upper hull and cylindrical turret are of indigenous design.
Surviving example
There is only one example of the Australian experimental light tank. It was previously on display at The Melbourne Tank Museum, owned by John Belfield. The Museum was closed down and the contents were sold off, the tank was for sold for $6215.[6] Its whereabouts are now unknown.
References
- ^ Cecil, Michael K. (1992). Australian Military Equipment Profiles, vol 2, Local Pattern Carriers 1939 to 1945. Australian Military Equipment Profiles. ISBN 0-646-12600-8.
- ^ "Surviving Canadian Australian Cruiser Tanks" (pdf). Retrieved 7 August 2016.
- ^ Melbourne Tank Museum exhibit information plaque
- ^ a b "Australian Experimental light tank - Introduction", Jedsite
{{citation}}: Unknown parameter|subscription=ignored (|url-access=suggested) (help) - ^ "Австралийский броненосец" (in Russian). Retrieved 7 August 2016.
- ^ "The Melbourne Tank Museum Sale: Experimental light tank". Antiques Reporter. Retrieved 7 August 2016.