Jump to content

BMW P60B40

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Knuuda (talk | contribs) at 10:54, 31 March 2016 (Usage: Slightly easier to read). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

BMW P60B40 Engine
Overview
ManufacturerBMW M GmbH
Production2001–2005
Layout
Configuration90° V8

The P60B40 is the V8 Powerplant of the E46 BMW GTR. The race engine config in the ALMS GTR produced 444-470HP.

Usage

The P60B40 was the powertrain for the BMW E46 M3 GTR from 2001 to 2005. The BMW M3 GTR competed in the GT2 Class of the American Le Mans Series in 2001. There was opposition to the car being allowed to race, rivals stated that the car was a prototype as a road going version was not available to buy. As a result of the complaints the regulations were modified for the 2001 Le Mans 24-hour race (and the American Le Mans Series) stating that a car had to be for sale on two continents within twelve months of the rules being issued. BMW complied however the ALMS rules were modified again in 2002 to state that there must a be a minimum of 100 cars and 1,000 engines built in order for a car to compete without penalties, BMW made the decision to pull the car rather than meet the requirements or race with the penalties, ending the E46 BMW GTR's and it's engine the P60B40's production.

An evolution of this engine powers the BMW E92 GTR. The E92 P65 has a 92mm bore and 75mm stroke.

Specifications

P60B40, V8 (90o) Cyl, 4 Stroke, Petrol Engine, Located Front Longitudinally

P60B40 on display at the BMW Museum

Capacity 3997cc, 94.0 x 72.0 mm

Compression Ratio 12.0:1

Power 444 bhp @ 7500 rpm

Torque 354 lb·ft (480 N·m) @ 5500 rpm

5 Main Bearings, Flat Plane Crank Shaft

Aluminium Block and Head

DOHC, 4 valves / cylinder - 32 valves total

Aspiration: Natural with BMW Motorsport engine-control system with port fuel injection

Firing Order 1-8-3-6-4-5-2-7

Dry Sump