Jump to content

Block-oriented terminal

Add links
From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Tedickey (talk | contribs) at 00:39, 15 September 2017 (revert - use discussion page). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

IBM 3279 Color Display Terminal

A block-oriented terminal or block mode terminal is a type of computer terminal that communicates with its host in blocks of data, as opposed to a character-oriented terminal that communicates with its host one character at a time. The IBM 3270 is perhaps the most familiar implementation of a block-oriented terminal, but most mainframe computer manufacturers and several other companies produced them.

In a typical application the host sends the terminal a preformatted panel containing both static data and fields into which data may be entered. The terminal operator keys data, such as updates in a database entry (or the device's buffer - 3270), into the appropriate fields. When entry is complete (or ENTER or PF key pressed on 3270's), a block of data, usually just the data entered by the operator (modified data), is sent to the host in one transmission. The 3270 terminal buffer (at the device) could be updated on a single character basis, if necessary, because of the existence of a "set buffer address order" (SBA), that usually preceded any data to be written/overwritten within the buffer. A complete buffer could also be read or replaced using the READ BUFFER command or WRITE Command (unformatted or formatted in the case of the 3270).

Block-oriented terminals have the advantage of causing less system load on the host and less network traffic than character-oriented terminals. On a multi-drop line there is considerable overhead for each transmission which is the same for a single character as for thousands of characters. Block-oriented terminals may also appear more responsive to the user, especially over slow connections, since editing within a field is done locally on the terminal itself rather than depending on echoing from the host system.

Early terminals had limited editing capabilities – 3270 terminals, for example, only offered the ability to check data entered into a field defined as numeric.[1] Later so-called "smart" or "intelligent" terminals incorporated microprocessors and supported more local processing.

Common block oriented terminals

See also

References

Wikimedia Commons has media related to Data terminals.
  1. ^ IBM Corporation (1972). IBM 3270 Information Display System Component Description (PDF).
  2. ^ "Already over 80,000 winners out there! (advertisement)". Computerworld. January 18, 1982. Retrieved November 27, 2012.
  3. ^ "HP 3000s, IBM CPUs Get On-Line Link". Computerworld. March 24, 1980. Retrieved November 27, 2012.
  4. ^ Lear Siegler Inc. "The ADM-31. A terminal far too smart to be considered Dumb" (PDF). Retrieved November 27, 2012.
Retrieved from "https://en.wikipedia.org/w/index.php?title=Block-oriented_terminal&oldid=800676115"