Block (data storage)
This article needs additional citations for verification. (April 2014) |
In computing (specifically data transmission and data storage), a block, sometimes called a physical record, is a sequence of bytes or bits, usually containing some whole number of records, having a maximum length, a block size.[1] Data thus structured are said to be blocked. The process of putting data into blocks is called blocking, while deblocking is the process of extracting data from blocks. Blocked data is normally stored in a data buffer and read or written a whole block at a time. Blocking reduces the overhead and speeds up the handling of the data-stream.[2] For some devices such as magnetic tape and CKD disk devices blocking reduces the amount of external storage required for the data. Blocking is almost universally employed when storing data to 9-track magnetic tape, to NAND flash memory, and to rotating media such as floppy disks, hard disks, and optical discs.
Most file systems are based on a block device, which is a level of abstraction for the hardware responsible for storing and retrieving specified blocks of data, though the block size in file systems may be a multiple of the physical block size. This leads to space inefficiency due to internal fragmentation, since file lengths are often not integer multiples of block size, and thus the last block of a file may remain partially empty. This will create slack space, which averages half a block per file. Some newer file systems attempt to solve this through techniques called block suballocation and tail merging.
Block storage is normally abstracted by a file system or database management system (DBMS) for use by applications and end users. The physical or logical volumes accessed via block I/O may be devices internal to a server, directly attached via SCSI or Fibre Channel, or distant devices accessed via a storage area network (SAN) using a protocol such as iSCSI, or AoE. DBMSes often use their own block I/O for improved performance and recoverability as compared to layering the DBMS on top of a file system.
See also
- Block (telecommunications)
- Disk sector
- Data cluster
- Extent (file systems)
- Object storage
- DEBLOCK (CONFIG.SYS directive) - disk deblocking configuration under DR-DOS
References
- ^ CNET Staff (5 May 2009). "Available hard drive space, block sizes, and size terminology". CNET. Retrieved 29 April 2014.
- ^ Chang, S.K. "PHYSICAL STRUCTURES". Captain SK. Retrieved 29 April 2014.