Jump to content

Block Error Rate

Add links
From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Athnex (talk | contribs) at 09:17, 23 December 2015 (Added some links + citation). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Block Error Rate (BLER) is used in measuring the error rate when extracting data frames from a Compact Disc (CD). The BLER measurement is often used as a quality control measure with regards to how well audio is retained on a compact disc over time.

Block Error Rate (BLER) is a ratio of the number of erroneous blocks to the total number of blocks received on a digital circuit. Block error rate (BLER) is used for W-CDMA performance requirements tests (demodulation tests in multipath conditions, etc.). BLER is measured after channel de-interleaving and decoding by evaluating the Cyclic Redundancy Check (CRC) on each transport block.

Block Error Rate (BLER) is used in LTE/4G technology to know the in-sync or out-of-sync indication during radio link monitoring(RLM).

BLER (in LTE) = No of erroneous blocks / Total no of Received Blocks. Normal BLER is 2% for an in-sync condition and 10% for an out-of-sync condition.

"Block Error Ratio (BLER) Measurement Description". February 28, 2014. Retrieved 23 December 2015.

Retrieved from "https://en.wikipedia.org/w/index.php?title=Block_Error_Rate&oldid=696463547"