Jump to content

CMA CGM Medea

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Monkbot (talk | contribs) at 11:19, 11 October 2015 (Task 9: convert line-break list(s) to unordered list(s) in ship infobox templates;). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

CMA CGM Medea
History
NameCMA CGM Medea
OperatorCMA CGM Ship Management
Port of registry France, Marseille
BuilderHyundai Samho
Yard numberS255
Launched2006
Identification
StatusIn service
Notes[1]
General characteristics
TypeContainer ship
Tonnage
  • 107,711 GT
  • 50,109 NT
  • 113,909 DWT
Length350 m (1,150 ft)
Beam43 m (141 ft)
Draught14.5 m (48 ft)
PropulsionMan B&W 12K98MC engine
Speed
  • 25.4 knots (47 km/h) (maximum)
  • 23.2 knots (43 km/h) (cruising)
Capacity9,415 containers
Notes[1]

CMA CGM Medea is a container ship built in 2006. Although she is among the largest in the world, she can carry four thousand fewer containers than the largest, Emma Mærsk.

Design

CMA CGM Medea was built in 2006 in the ship-yard of Hyundai Heavy Industries. She is 350 m (1,150 ft) long and has a beam of 43 m (141 ft). The draft, while the ship is fully loaded can reach a maximum of 14.5 m (48 ft). The ship has a deadweight tonnage of 113,909 metric tons and a gross tonnage of 107,711 gross tons. The large size makes the ship more profitable. The net tonnage of CMA CGM Medea is 50,109 net tons. The vessel has a capacity for 9,415 TEU, according to company calculations.[1]

Engine equipment

The main engine installed on board of CMA CGM Medea is Man B&W 12K98MC, which is both reliable and produces high power at low revolutions. This produces a cruising speed of 23.2 knots, with a maximum speed of 25.4 knots. In addition the ship has two bow thrusters with power of 2,500 kW each, for added manoeuvrability in ports.

Bridge equipment

CMA CGM Medea is equipped with modern instruments to allow the plotting of the ship's position. The bridge equipment consists of GPS, dGPS, Automatic Identification System (AIS) and Automatic Radar Plotting Aid (ARPA), which usually allows the position of the ship to be plotted with an accuracy of 100 meters. The Electronic chart system - ECDIS plots the ship's position against charts automatically. The information from the AIS, ARPA and Radar is used to allow the bridge crew to accurately plot the positions of other ships in the vicinity.

See also

References

  1. ^ a b c "Merchant Vessel - CMA CGM Medea". Ships-info. 25 July 2010. Retrieved 25 August 2010.