Canadian National class S 2-8-2
Canadian National class S | |||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| |||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||
|
Canadian National Railway (CN) Class S locomotives were of 2-8-2 wheel arrangement in the Whyte notation, or " 1'D1' " in UIC classification. These locomotives were designed for 16° operating curvature. The first examples of this very successful class were built for the Grand Trunk Railway in 1913. Major purchases of the class continued through 1924. Sub-classes S-3 and S-4 employed higher pressure boilers with smaller diameter cylinders to achieve similar tractive effort with higher efficiency. The class remained in freight service until the final replacement of steam with diesel-electric locomotives. Twenty-one were renumbered between 4045 and 4097 in 1956.[1]
Sub-classes
Sub-class | Builder | Works numbers | Dates | CN numbers | Notes[1] |
---|---|---|---|---|---|
S-1-a | CLC | 1353-1402 | 1916-1917 | 3200-3249 | built as CGR numbers 2800-2849 |
S-1-b | CLC | 1459-1508 | 1917-1918 | 3250-3299 | built as CGR numbers 2850-2899 |
S-1-c | MLW | 58347-58376 | 1917 | 3300-3329 | built as CGR numbers 2900-2929 |
S-1-d | CLC | 1535-1594 | 1918-1919 | 3330-3389 | built as CGR numbers 2930-2989 |
S-1-e | CLC | 1673-1687 | 1920-1921 | 3390-3404 | |
S-1-f | ALCO | 52788-52812 | 1913 | 3405-3429 | built as GT numbers 500-524 |
S-1-f | BLW | 40210-40211 40255-40258 40269-40274 40339-40342 40365-40370 40379-40381 |
1913 | 3430-3454 | built as GT numbers 525-549 |
S-1-f | MLW | 53920-53969 | 1913 | 3455-3504 | built as GT numbers 550-599 |
S-1-g | CLC | 1449-1458 | 1917 | 3505-3514 | built as GT numbers 485-494 |
S-1-g | ALCO | 59950-59954 | 1918 | 3515-3519 | [2] built as GT numbers 480-484 |
S-1-h | ALCO | 58315-58319 | 1918 | 3520-3524 | [2] built as GT numbers 495-499 |
S-1-j | CN | 53928&53954 | 1926 | 3198-3199 | [3] |
S-2-a | MLW | 64475-64509 | 1923 | 3525-3559 | |
S-2-b | CLC | 1712-1721 | 1923 | 3560-3569 | |
S-2-c | MLW | 65633-65662 | 1924 | 3570-3599 | |
S-3-a | ALCO | 59563-59577 60300-60324 |
1918 | 3700-3739 | [4] USRA Light Mikados built as GT numbers 440-479 |
S-3-b | ALCO | 64510-64517 | 1923 | 3740-3747 | [4][5] |
S-3-c | ALCO | 65317-65326 | 1924 | 3748-3757 | [4] |
S-4-a | CN | 1623 | 1930 | 3800 | [3][6] |
S-4-b | CLC | 1914-1918 | 1936 | 3801-3805 | [6] |
Preservation
Number 3239 was preserved by the Canadian Railway Historical Association. Number 3254 by W.F. Barron of Ashland, Pennsylvania. #3254 is the only operational of the surviving S Class 2-8-2s, finding its home on the rails of Steamtown in Scranton, PA. Number 3377 by the Edaville Railroad, and number 3734 (renumbered 4070) by the National Museum of Steam Propulsion at Middleville, Michigan.[1]
Notes
- ^ a b c d Clegg, Anthony & Corley, Ray (1969). Canadian National Steam Power. Trains & Trolleys: Montreal. pp. 91–95.
{{cite book}}
: CS1 maint: multiple names: authors list (link) - ^ a b Numbers 3515-3517 & 3520-3523 were converted to 0-8-2 switchers in 1936 and 1937
- ^ a b Built in Canadian National Railway Point Saint Charles shops
- ^ a b c Boiler pressure increased to 200 lbf/in2 (14 kg/cm2) and cylinder diameter reduced to 26 inches (66 cm).
- ^ Ordered as GT numbers 600-607, but delivered to CN
- ^ a b Boiler pressure increased to 265 lbf/in2 (18.6 kg/cm2) and cylinder diameter reduced to 24 inches (61 cm).