Cut (earthworks)
In civil engineering, a cut or cutting is where soil or rock material from a hill or mountain is cut out to make way for a canal, road or railway line.
In cut and fill construction it keeps the route straight and/or flat, where the comparative cost or practicality of alternate solutions (such as diversion) is prohibitive. Contrary to the general meaning of cutting, a cutting in construction is mechanically excavated or blasted out with carefully placed explosives. The cut may only be on one side of a slope, or directly through the middle or top of a hill. Generally, a cut is open at the top (otherwise it is a tunnel). A cut is (in a sense) the opposite of an embankment.
When used in reference to transportation routes, it reduces the grade of the route.
Cuts can be created by multiple passes of a shovel, grader, scraper or excavator, or by blasting.[1] One unusual means of creating a cut is to remove the roof of a tunnel through daylighting. Material removed from cuts is ideally balanced by material needed for fills along the same route, but this is not always the case when cut material is unsuitable for use as fill.
The word is also used in the same sense in mining, as in an open cut mine.
History
The term cutting appears in the 19th century literature to designate rock cuts developed to moderate grades of railway lines.[2] Railway Age's Comprehensive Railroad Dictionary defines a cut as "a passage cut for the roadway through an obstacle of rock or dirt."[3]
Types of cut
There are at least two types of cut, sidehill cut and through cut. The former permits passage of a transportation route alongside of or around a hill, where the slope is transverse to the roadway. A sidehill cut can be formed by means of sidecasting, i.e., cutting on the high side balanced by moving the material to build up the low side to achieve a flat surface for the route. In contrast, through cuts, where the adjacent grade is higher on both sides of the route, require removal of material from the area since it cannot be dumped alongside the route.[4]
Notable cuts
Notable canal cuts
- Culebra Cut (Gaillard Cut) on the Panama Canal
- Dawesville Cut
Notable railway cuts
- Olive Mount cutting, Liverpool
- Bergen Hill
- Duffy's Cut
- Talerddig cutting
- Windmill Hill Cutting
- Hellfire Pass
Notable roadway cuts
See also
- Cut-and-cover
- Embankment (transportation)
- Trench
- Dashrath Manjhi
- Flying arch, use of a dummy arch bridge to stabilise cutting walls against landslip
References
- ^ Herbert L. Nichols, Jr., and David A. Day, P.E., Moving the Earth: The Workbook of Excavation, 5th ed. (New York: McGraw-Hill, 2005), pp. 8.16 et seq.
- ^ Alexander Smith (1875) A new history of Aberdeenshire
- ^ Robert G. Lewis et al., eds., Railway Age's Comprehensive Railroad Dictionary (Omaha, Neb.: Simmons-Boardman Books, 1984), p. 48. This reference does not include a definition for the corresponding term fill.
- ^ Nichols and Day, Moving the Earth, p. 8.16.
