Jump to content

Albert Strickler

From Wikipedia, the free encyclopedia
(Redirected from Draft:Albert Strickler)

Albert Strickler (25 July 1887 – 1 February 1963) was a Swiss mechanical engineer recognized for contributions to our understanding of hydraulic roughness in open channel and pipe flow. Strickler proposed that hydraulic roughness could be characterized as a function of measurable surface roughness and described the concept of relative roughness, the ratio of hydraulic radius to surface roughness. He applied these concepts to the development of a dimensionally homogeneous form of the Manning formula. [1] [2]

Life

[edit]

Albert Strickler was the only child of Albert Strickler, Sr. (1853–1936) and Maria Auguste Flentjen (1863–1945) of Wädenswil, Canton of Zürich, Switzerland. He was married twice, the second time as a widower. Neither marriage produced children.[1]

Strickler graduated from ETH Zurich as a mechical engineer in 1911. He earned a Ph.D. in 1917 while serving as the principal assistant to Professor Franz Prasil (1857–1929). Throughout his career, he was involved in the development of hydropower with interests ranging from hydraulic machinery to the regulation of river flows for inland navigation. Prior to World War II, he was the vice president of the Association of Exporting Electricity and a member of the board of directors on the Gotthard Electricity Mains AG, Altdorf, Uri. He subsequently worked as an engineering consultant until illness forced his withdrawal from practice in 1950.[1]

Strickler's Equation

[edit]

In 1923, Strickler published a report examining 34 formulas for the computation of flow in pipes and open channels and related experimental data. [3] The report validated the Gauckler formula and by inference, the Manning formula. Strickler proposed that the Ganguillet-Kutter n-value, used to characterize hydraulic roughness in the Manning formula, could be defined as a function of surface roughness, . [1] [2] [4]

Strickler’s equation introduces a new emperical coefficient which must be determined experimentally to define n-value. However, unlike n-value, which has units of T/L1/3, has units of length, and at least in theory, is a measurable quantity.[Notes 1] A measurable quantity is potentially useful for channel design and stream restoration engineering where the design value of hydraulic roughness may be unknown. [4]

Stricker proposed that for a fixed boundary, surface roughness could be defined by the median grain size of a river’s bed material. He also noted that the onset of sediment transport, the mobile boundary condition, increased the observed hydraulic roughness.[1]

Strickler's equation describes n-value, a measure of hydraulic roughness, as a fuction of the median diameter of gravel particles on a river bed.

For fixed boundary, gravel bed rivers, Strickler’s equation can be quantified as:[2]

where is the median grain size in meters.

Later researchers produced variations on Strickler’s equation proposing different measures of surface roughness and corresponding variations in the empherical coefficient. For example, Strickler’s equation has been used to estimate n-values for riprap lined channels from stone gradation.[5] [4] The equation also describes the scaling of hydraulic roughness in Froude scaled, physical hydraulic models. [6] [7] In 1933, Johann Nikuradse published a study of hydraulic roughness in pipes that validated Strickler’s observations of the influence of surface roughness in turbulent flows.[2]

Dimensionally Homogeneous Gauckler–Manning–Strickler Formula

[edit]

Given the Gauckler–Manning–Strickler formula:

where:

is velocity in meters per second,
is n-value in seconds per meter1/3,
is the Strickler coefficient, ,
is hydraulic radius in meters, and
is the dimensionless water surface slope.[Notes 2]

Substituting Strickler’s equation for n-value and rearranging terms produces a dimensionally homogeneous form of the Manning’s formula:[2]

Where is acceleration due to gravity in meters per second2.

The first term on the right-hand side of the equation is the dimensionless ratio of hydraulic radius to roughness height, commonly referred to as relative roughness. The remaining term, known as the boundary shear velocity, approximates the flow of water downhill under the influence of gravity and has units of velocity, i.e., L/T. [8] [1] [4]

From experimental data, Stickler proposed that the dimensionally homogeneous form of the Manning formula could be quantified as:[3]

where

In civil engineering practice, the Manning formula is more widely used than Stricker’s dimensionally homogeneous form of the equation. However, Strickler’s observations on the influence of surface roughness and the concept of relative roughness are common features of a variety of formulas used to estimate hydraulic roughness. [1] [4]

Publications

[edit]

Source:[1]

  • Strickler, A. (1923). “Contributions to the question of velocity formula and the roughness numbers for rivers, channels and pipes.” Mitteilung 16, C. Mutzner, ed., Amt für Wasserwirtschaft, Bern, Switzerland (in German).
  • Strickler, A. (1924). “Drag resistance of propeller boats, and their performance in inland navigation.” Mitteilung 17, Amt für Wasserwirtschaft, Bern, Switzerland (in German).
  • Strickler, A. (1925). “The regulation of Rhine River between Strassburg and Basle.” Schweizerische Techniker-Zeitung, 22(33), 389–394 (in German).
  • Strickler, A. (1926). “Studies on measurement of discharge.” Mitteilung 18, C. Mutzner, ed., Amt für Wasserwirtschaft, Bern, Switzerland (in German).
  • Strickler, A. (1926). “Relation between the Swiss hydropower development and inland navigation.” Werft, Reederei, Hafen, 7(14), 345–346 (in German).
  • Strickler, A. (1930). “The question of the coefficient in Chézy’s formula.” Gesamtbericht der 2. Weltkraftkonferenz, Berlin, 2, 137–152 (in German).

References

[edit]
  1. ^ a b c d e f g h Hager, Willi H. (July 2015). "Albert Strickler: His Life and Work". Journal of Hydraulic Engineering. 141 (7): 02515002. doi:10.1061/(ASCE)HY.1943-7900.0001000. Retrieved 2023-05-15.
  2. ^ a b c d e Dooge, James (26 May 1989). "The Manning Formula in Context". In Ben Chie YEN (ed.). Proceedings of the International Conference on Channel Flow and Catchment Runoff: Centennial of Manning's Formula and the Rational Formula. Charlottesville, Virginia: University of Virginia.
  3. ^ a b Strickler, Albert (1923). Contributions to the Question of a Velocity Formula and Roughness Data for Streams, Channels and Closed Pipelines (Technical report). Swiss Department of the Interior, Report of the Bureau of Water Affairs. 16.
  4. ^ a b c d e "Chapter 5, Methods for Predicting n Values for the Manning Equation", Hydraulic Design of Flood Control Channels, Engineer Manual 1110-2-1601 (PDF) (Change 1, 30 June 1994 ed.), US Army Corps of Engineers, 1 July 1990, retrieved 2023-08-05
  5. ^ Maynord, Stephen T. (December 1992). Riprap resistance tests from a large test channel (Technical report). US Army Engineer Waterways Experiment, Hydraulics Laboratory (U.S.). Miscellaneous Paper HL-92-5.
  6. ^ Ettema, R. (2000-05-18). Ettema, R. (ed.). Hydraulic Modeling: Concepts and Practice. Manual of Practice. American Society of Civil Engineers. doi:10.1061/9780784404157. ISBN 978-0-7844-0415-7. Retrieved 2023-05-01.
  7. ^ "Section 4-5, Hydraulic Model Studies", Hydraulic Design of Flood Control Channels, Engineer Manual 1110-2-1601 (PDF) (Change 1, 30 June 1994 ed.), US Army Corps of Engineers, 1 July 1990, retrieved 2023-08-05
  8. ^ Ven Te Chow (1959). Open-channel hydraulics. McGraw-Hill. OCLC 4010975.

Notes

[edit]
  1. ^ The units of Kutter's n-value as applied in the Manning formula are a matter of debate. While both dimensional analysis and application of the Manning formula imply units of T/L1/3, other interpretations have been proposed. Chow examined the development of formulas using n-value and concluded that the historical record did not resolve the question.
  2. ^ For uniform flow, the water surface and bed slopes are equal. As applied in these formulas, slope is an approximation of for small values of . See Shallow_water_equations#Derivation_from_Navier–Stokes_equations.

See also

[edit]