Jump to content

Equivalent rectangular bandwidth

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 134.151.33.108 (talk) at 11:25, 20 September 2016 (Second equation highlighted as "not in citation given" is Equation 3 of cited article). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

The equivalent rectangular bandwidth or ERB is a measure used in psychoacoustics, which gives an approximation to the bandwidths of the filters in human hearing, using the unrealistic but convenient simplification of modeling the filters as rectangular band-pass filters.

Approximations

For moderate sound levels and young listeners, the bandwidth of human auditory filters can be approximated by the polynomial equation:

[1] (Eq.1)

where f is the center frequency of the filter in kHz and ERB(f) is the bandwidth of the filter in Hz. The approximation is based on the results of a number of published simultaneous masking experiments and is valid from 0.1 to 6.5 kHz.[1]

The above approximation was given in 1983 by Moore and Glasberg,[1] who in 1990 published another (linear) approximation:[2]

[2] (Eq.2)

where f is in kHz and ERB(f) is in Hz. The approximation is applicable at moderate sound levels and for values of f between 0.1 and 10 kHz.[2]

ERB-rate scale

The ERB-rate scale, or simply ERB scale, can be defined as a function ERBS(f) which returns the number of equivalent rectangular bandwidths below the given frequency f. It can be constructed by solving the following differential system of equations:

The solution for ERBS(f) is the integral of the reciprocal of ERB(f) with the constant of integration set in such a way that ERBS(0) = 0.[1]

Using the second order polynomial approximation (Eq.1) for ERB(f) yields:

[1]

where f is in kHz. The VOICEBOX speech processing toolbox for MATLAB implements the conversion and its inverse as:

[3]
[4]

where f is in Hz.

Using the linear approximation (Eq.2) for ERB(f) yields:

[5]

where f is in Hz.

See also

References

  1. ^ a b c d e B.C.J. Moore and B.R. Glasberg, "Suggested formulae for calculating auditory-filter bandwidths and excitation patterns" Journal of the Acoustical Society of America 74: 750-753, 1983.
  2. ^ a b c B.R. Glasberg and B.C.J. Moore, "Derivation of auditory filter shapes from notched-noise data", Hearing Research, Vol. 47, Issues 1-2, p. 103-138, 1990.
  3. ^ Brookes, Mike (22 December 2012). "frq2erb". VOICEBOX: Speech Processing Toolbox for MATLAB. Department of Electrical & Electronic Engineering, Imperial College, UK. Retrieved 20 January 2013.
  4. ^ Brookes, Mike (22 December 2012). "erb2frq". VOICEBOX: Speech Processing Toolbox for MATLAB. Department of Electrical & Electronic Engineering, Imperial College, UK. Retrieved 20 January 2013.
  5. ^ Smith, Julius O.; Abel, Jonathan S. (10 May 2007). "Equivalent Rectangular Bandwidth". Bark and ERB Bilinear Transforms. Center for Computer Research in Music and Acoustics (CCRMA), Stanford University, USA. Retrieved 20 January 2013.