Jump to content

Fend Flitzer

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 95.244.169.5 (talk) at 01:09, 26 August 2018 (Corrected: "aeronautical"). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

1950 Fend Flitzer 101

The Fend Flitzer was a three-wheeled invalid carriage designed and built by Fritz Fend. The Flitzer established many of the basic concepts on which Fend's later Messerschmitt Kabinenroller microcars were developed.

Background

In 1948, Fend, a former aeronautical engineer and technical officer in the Luftwaffe,[1] began production of a tricycle invalid carriage in his workshop in Rosenheim, Germany.[2][3][4] The tricycle had a front wheel that was steered by handlebars and powered by a mechanism actuated by pushing back and forth on the handlebars. Shortly afterward, it was offered with a 38 cc (2.3 cu in) Victoria two-stroke proprietary engine normally used for motorizing bicycles.[2]

Fend then designed the Flitzer, a larger, better-enclosed invalid carriage. It was designed from the start to be powered by a gasoline engine. Whereas the earlier tricycle was both steered and powered by a single front wheel, the Flitzer had a pair of front wheels linked to the steering mechanism and a powered rear wheel.[2]

Specifications and development

Flitzer 101 emblem

The Flitzer was made with aluminium panels over a steel frame[2] and was enclosed at the front, sides, and back.[citation needed] It had a hatch at the top that was hinged at the front and tilted forward for the operator to get in.[2] The first version of the Flitzer was open, with a hole and a windshield in the hatch for the operator's head and shoulders to stick through and be protected from the wind.[citation needed] Flitzers made from September 1948 into 1950[3] were powered by a 98 cc (6.0 cu in) Fichtel & Sachs two-stroke engine.[2][3][4] Suspension was by rubber springs loaded in torsion.[2]

In 1950 the engine was changed to a 100 cc (6.1 cu in) Riedel/Imme engine.[2][3][4] By 1951, in response to customer requests for passenger-carrying capability, a scooter-type saddle was placed above the rear enclosure with footrests on either side of the body.[2] A closed version, on which the hatch had an enclosure that covered the operator, was made available. The enclosure included the windshield and side windows.[2][3]

Reception and legacy

Right rear view of a Flitzer 101

About 250 Flitzers had been built when production stopped in 1951. Many of these invalid carriages had been bought by able-bodied individuals seeking basic personal transport.[2] This led Fend to believe that there would be a mass-market for a larger, transport-oriented version of the Flitzer.[5] Fend began to design and develop a two-seat vehicle similar in concept to the Flitzer.[3] He also began looking for a manufacturer to mass-produce this vehicle. He came to an agreement with Messerschmitt for them to build Fend vehicles in their factory at Regensburg[3][5] Part of the agreement was that the cars carried the Messerschmitt name, with Fend's new design being designated the Messerschmitt KR175.[3][6]

Notes

  1. ^ Wagner 1973, p. 163.
  2. ^ a b c d e f g h i j k Wagner 1973, p. 164.
  3. ^ a b c d e f g h Cawthon 2008.
  4. ^ a b c Payne 2004.
  5. ^ a b Wagner 1973, p. 165.
  6. ^ Wagner 1973, p. 167.

References

  • Cawthon, Bill (2008-03-01). "Fritz Fend's Marvelous Micro-cars". http://www.promotex.ca/index.php. Cadabra Corp. Archived from the original on 2011-07-06. Retrieved 23 August 2008. {{cite web}}: Cite has empty unknown parameter: |coauthors= (help); External link in |work= (help); Invalid |ref=harv (help); Unknown parameter |deadurl= ignored (|url-status= suggested) (help)
  • Payne, Elvis (2004-05-31). "3-Wheelers.com - Fend". http://www.3wheelers.com/enter.html. Archived from the original on 2011-07-07. Retrieved 24 August 2008. {{cite web}}: Cite has empty unknown parameters: |month= and |coauthors= (help); External link in |work= (help); Invalid |ref=harv (help); Unknown parameter |deadurl= ignored (|url-status= suggested) (help)
  • Wagner, Carl (1973). Vorderman, Don (ed.). ""Ist das nicht ein Kabinenroller?" "Ja! das ist ein Kabinenroller!" Carl Wagner takes off on Messerschmitt". Automobile Quarterly. 11 (2 – Second quarter). 40 East 49th Street, New York, NY 10017 USA: Automobile Quarterly Inc.: 162–171. LCCN 62-4005. {{cite journal}}: Cite has empty unknown parameters: |laysummary=, |laydate=, and |laysource= (help); Invalid |ref=harv (help)CS1 maint: location (link)
Wikimedia Commons has media related to Fend Flitzer.
Retrieved from "https://en.wikipedia.org/w/index.php?title=Fend_Flitzer&oldid=856549793"