English: The loss in reflectivity due to the slope corresponding to a defect edge. Outside the sloped region, the surface is assumed flat, giving the full reflectivity of the multilayer (angle of incidence is 6 degrees). Within the sloped region, the tilt results in incident light at the wrong angle of incidence, which reduces the multilayer reflectivity as the light deviates further from normal incidence.
The reference data for multilayer reflectivity vs. angle of incidence was obtained at the CXRO web site. The multilayer consists of 40 6.9 nm periods containing Si (60%) on Mo (40%) on an SiO2 substrate.
to share – to copy, distribute and transmit the work
to remix – to adapt the work
Under the following conditions:
attribution – You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
share alike – If you remix, transform, or build upon the material, you must distribute your contributions under the same or compatible license as the original.
Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license is included in the section entitled GNU Free Documentation License.http://www.gnu.org/copyleft/fdl.htmlGFDLGNU Free Documentation Licensetruetrue
You may select the license of your choice.
Original upload log
The original description page was here. All following user names refer to en.wikipedia.
The loss in reflectivity due to the slope corresponding to a defect edge. Outside the sloped region, the surface is assumed flat, giving the full reflectivity. Within the sloped region, the tilt results in incident light at the wrong angle of incidence, w
Captions
Add a one-line explanation of what this file represents