Jump to content

File:Jack-Plug-v2.png

From Wikipedia, the free encyclopedia

Original file (1,280 × 864 pixels, file size: 181 KB, MIME type: image/png)

Summary

[edit]
File information
Description

Raytraced image of two jack plugs, one mono, the other stereo. Numbers on details added, and image cropped afterwards in a graphics software package.
Numbers indicate:

  1. Sleeve - usually ground
  2. Ring - Right-hand channel for stereo signals, negative phase for balanced mono signals, power supply for power-requiring mono signal sources
  3. Tip - Left-hand channel for stereo signals, positive phase for balanced mono signals, signal line for unbalanced mono signals
  4. Isolating rings
Source

Rendered with POV-Ray (see http://www.povray.org) -see below for the scene description for this image

Changes

  1. Copied from http://commons.wikimedia.org/wiki/Image:Jack_plug.png
  2. Reduced number size
Date
Author

TotoBaggins (talk) (Uploads)

Permission
(Reusing this file)

See below. 



----
  /*
  ======================================
  "Jack"- or "Tip-ring-sleeve"-type plug
  --------------------------------------
  Created by Søren Peo Pedersen - see my
  user page at
  http://da.wikipedia.org/wiki/Bruger:Peo
  ======================================
  */
  
  #declare Metallic=texture {   // Texture for
      pigment {color rgb .3}    // metallic parts
      finish {                  // of the jacks
          reflection .7
          phong 1
          phong_size 60
          ambient .5
          diffuse .5
          metallic
          }
      }
  
  #declare Isolator=texture {   // Texture for insu-
      pigment {color rgb 0}     // lator between tip,
      finish {                  // ring, and sleeve
          reflection .5
          phong 1
          phong_size 20
          }
      }
  
  #declare Spotty=pigment {     // Spotty pigment
          bozo                  // for surroundings,
          color_map {           // to enhance the
              [0 color rgb 0]   // reflective parts
              [1 color rgb 1]   // of the plugs
              }
          scale .3
          }
  
  sky_sphere {                  // Make for "surroundings"
      pigment {
          gradient y
          pigment_map {
              [0.0 color rgb 1.0]
              [0.12 color rgb 1.0]
              [0.2 Spotty]
              [1.0 Spotty]
              }
          translate <0,-.5,0>
          scale 2            
          rotate <-90,0,0>
          }
      }
  
  #macro Jack_plug(StereoFlag)  // Common macro for mono & stereo plug
  
  union {             // Cable extending from
    sphere_sweep {    // rear end of the plugs
      cubic_spline,5,
      <0,100,0>,2.7
      <0,-40,0>,2.7
      <20,-90,-10>,2.7
      <-0,-240,-40>,2.7
      <-0,-290,-90>,2.7
      
      pigment {color rgb .5}
      finish {
        ambient .5
        diffuse .5
        }
      }
      
      // Conical "sleeve" where the cable enters the jack:
      cone {<0,-24.5,0>,5,<0,-40,0>,3 pigment {color rgb .5}}
      torus {3,1 translate <0,-40,0> pigment {color rgb .5}}
      
      // Cylindrical, dark "body"
      cylinder {<0,-24.5,0>,<0,-24,0>,5.5 texture {Isolator pigment {color rgb .2}}}
      torus {5.5,.5 translate <0,-24,0> texture {Isolator pigment {color rgb .2}}}
      cylinder {<0,-1,0>,<0,-24,0>,6 texture {Isolator pigment {color rgb .2}}}
      torus {5.5,.5 translate <0,-1,0> texture {Isolator pigment {color rgb .2}}}
      
      cone {0,4.5,<0,-.5,0>,5.5 texture {Metallic}} // Metal "base" of plug
      
      cylinder {<0,0,0>,<0,   // "Sleeve" part of the plug
        #if(StereoFlag !=0) 15.3 #else 21.2 #end
        ,0>,3.1
        texture {Metallic}
        }
      
      #if (StereoFlag != 0) // If rendering the stereo (3-way) version:
        cylinder {<0,15.3,0>,<0,16.3,0>,3.1 texture {Isolator}}   // Add an extra, narrow isolator
        cylinder {<0,16.3,0>,<0,21.2,0>,3.1 texture {Metallic}}   // and the ring
      #end
      
      cylinder {<0,21.2,0>,<0,22.8,0>,3.1 texture {Isolator}}       // Wide isolator
      // Cylindrical section right behind the tip:
      cylinder {<0,22.8,0>,<0,23.5066144,0>,3.1 texture {Metallic}}
      
      merge {   // The tip with "neck" and conical end
          cone {<0,31.2,0>,0.8,<0,27.7156,0>,3.0111}
          torus {2.5,.6 translate <0,27.4,0>}
          cone {<0,23.6,0>,0.8,<0,27.0844,0>,3.0111}
          
          difference {
              cylinder {0,<0,1.638,0>,2.866144}
              torus {2.866144,1.066144 translate <0,1.066144,0>}
              translate <0,23.8,0>                    
              }
          torus {2.8066144,0.2933856 translate <0,23.5066144,0>}
          
          texture {Metallic}
          }
      }
  
  #end  // End of macro
  
  // Show a mono and a stereo jack:
  #object {Jack_plug(1) rotate <0,-20,0> rotate <-40,0,-100> translate <0,11,0>}
  #object {Jack_plug(0) rotate <0,20,0> rotate <-40,0,-100> translate <0,-8,0>}
  
  light_source {<-10000,5000,-10000> color rgb 2}            
  camera {location <0,0,-80> look_at <0,0,0> angle 50}
----

Licensing

[edit]

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current03:01, 7 February 2007Thumbnail for version as of 03:01, 7 February 20071,280 × 864 (181 KB)TotoBaggins (talk | contribs)reduced number size, from: http://en.wikipedia.org/wiki/Image:Jack_plug.png

You cannot overwrite this file.

Retrieved from "https://en.wikipedia.org/w/index.php?title=File:Jack-Plug-v2.png&oldid=875489113"