Schreder HP-19
| HP-19 | |
|---|---|
| Role | Glider |
| National origin | United States |
| Designer | Richard Schreder |
| First flight | 1981 |
| Introduction | 1981 |
| Number built | one |
The Schreder HP-19 is an American, high-wing, T-tail, single seat glider designed by Richard Schreder.[1][2]
Design and development
[edit]The HP-19 was another Schreder design for the FAI 15 Metre Class. The HP-19 drawings were just complete when the designer lost interest in development and turned his attention to the HP-21 instead. The sole example of the HP-19 was built by Henry Preiss in Schreder's workshop in Bryan, Ohio and first flew in 1981.[1][2][3]
The HP-19 is built from metal and fiberglass and features carbon fiber spar caps, along with foam ribs. The wing is straight, tapered and has winglets, along with the trademark Schreder 90° flaps. The airfoil is a Schreder modification of a Wortmann section. 200 lb (91 kg) of water ballast can be carried. The landing gear is a retractable monowheel.[1][2]
Variants
[edit]- HP-19C
- The sole example of the HP-19 is registered as an HP-19C.[3]
Specifications (HP-19)
[edit]Data from Sailplane Directory and Soaring[1][2]
General characteristics
- Crew: one
- Wingspan: 49 ft 3 in (15 m)
- Wing area: 113 sq ft (10.5 m2)
- Aspect ratio: 21.4
- Airfoil: Schreder modification of a Wortmann section
- Empty weight: 470 lb (213 kg)
- Gross weight: 970 lb (440 kg) includes 200 lbs (91 kg) or water ballast
Performance
- Maximum glide ratio: 42:1 at 50 mph (80 km/h)
- Rate of sink: 96 ft/min (0.49 m/s) at 40 mph (64 km/h)
- Wing loading: 8.58 lb/sq ft (41.9 kg/m2)
See also
[edit]
References
[edit]- ^ a b c d Activate Media (2006). "HP-19 HP Aircraft, LLC". Archived from the original on May 2, 2002. Retrieved April 19, 2011.
- ^ a b c d Said, Bob: 1983 Sailplane Directory, Soaring Magazine, page 24. Soaring Society of America, November 1983. USPS 499-920
- ^ a b Federal Aviation Administration (April 2011). "Make / Model Inquiry Results". Retrieved April 19, 2011.