Jump to content

ISO 4165

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 79.67.252.59 (talk) at 14:24, 23 January 2014 (ISO). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Comparison of (L to R) two Powerlet plugs, one combination plug, and one Cigar Lighter Plug

ISO 4165 is a standard adopted by the International Organization for Standardization (ISO) that describes a double-pole DC connector to supply between 12 and 24 V DC at up to 12 amps to appliances in vehicles. Although roughly similar in design to an automotive accessory receptacle, the ISO 4165 connector is shorter and smaller in diameter. It was originally a standard fitting on all the German military vehicles during World War II.

The body (which remains outside the receptacle) is 20 mm in diameter. The resilient neck must mate with a 12 mm diameter hole. The center pin is 5 mm in diameter.

The ISO 4165:2001[1] DC connector is also known as the BMW Accessory plug, as it is used on BMW motorcycles; as the Powerlet connector, named after a firm that produces them; and, in Australia (where they are popular in mobile power applications, including 4WD and Caravaning), as the Hella plug, or Merit plug.

At least one manufacturer sells a plug that combines a cigarette lighter plug and a powerlet, in much the same way that combination auto/airplane notebook computer power adapters combine a cigarette lighter plug and an ARINC 628/EmPower plug.

Development

  • Technical Committee ISO/TC 22, Road vehicles, Subcommittee SC 3, Electrical and electronic equipment

Versions

  • ISO 4165:2001 (Second Edition; revisions to the figures and addition of test procedures)
  • ISO 4165:1979 (Original ISO version of standard; withdrawn)
  • BS EN ISO 4165:2003 (British Standard version; current)
  • BS EN 24165:1992 (British Standard version; withdrawn)

References

  1. ^ "ISO 4165:2001 Road vehicles -- Electrical connections -- Double-pole connection". International Organization for Standardization. 2012-04-20.

See also