Mateba Autorevolver
| Mateba Autorevolver | |
|---|---|
 Mateba Model 6 Unica (Dynamic Sportiva) | |
| Type | Automatic revolver |
| Place of origin | Italy |
| Production history | |
| Designer | Emilio Ghisoni |
| Designed | 1997 |
| Manufacturer | MA.TE.BA. Arms (Macchine Termo-Balistiche), via Villa Serafina, 2/B. 27100 Pavia (Italy) |
| Produced | 1997-2005 |
| Variants | Variants |
| Specifications | |
| Mass | 2.96 lb (1.35 kg) |
| Length | 275 mm (10.83 in) |
| Barrel length | 152 mm (6 in) |
| Cartridge | |
| Action | Recoil operated semi-automatic revolver |
| Rate of fire | Semi-automatic |
| Feed system | 6-Round Cylinder |
| Sights | Iron sights Fixed Two-Dot Night Sight |
The Mateba Model 6 Unica (often known simply as the Mateba or the Mateba Autorevolver) is a recoil operated semi-automatic revolver, one of only a few of this type ever produced. It was developed by Mateba, based in Pavia, Italy.
Emilio Ghisoni (d. 2008) is listed as the owner of US Patent #4,712,466 which details the operation of the weapon.
Design
The Mateba Model 6 uses the recoil from firing to rotate the cylinder and cock the hammer, unlike conventional revolvers, which depend on the user physically pulling the trigger and/or cocking the hammer to actuate the weapon's mechanism of operation.
The Mateba Autorevolver's barrel alignment is different from most other revolvers. The barrel is aligned with the bottom of the cylinder instead of the top. This lowers the bore axis (line of the barrel) which directs the recoil in line with the shooter's hand thereby reducing the twisting motion or muzzle flip of normal revolvers.[1]
The gun's entire upper assembly (barrel, cylinder and frame) are mounted on rails on the lower frame, which houses the trigger, hammer, and grip, and recoils 1/2 of an inch, or 12.7mm, on firing. The rearward motion of the upper assembly cocks the hammer, and the cylinder is rotated on the forward stroke.[2]
Variants
The following are variants of the Mateba revolver:[3][4][5][6]
Defense - 4" Barrel, .357 Magnum
Home Protection - 5" Barrel, .44 Remington Magnum
Dynamic Sportiva - Either 5" or 6" barrel, .357 Magnum
Hunter - 8 3/8" Barrel, .357 Magnum (.38 Special) and .44 Remington Magnum (.44 S&W Special)
In addition, their barrels can be changed with interchangeable 3", 4", 5", 6", 7" and 8" inch barrels.
Mateba Grifone
Also available was the Mateba Grifone, which mated an 18-inch barrel, hand guard and butt stock to the Autorevolver's frame and action. It was available in .357 Magnum and .44 Magnum. A version in .454 Casull was available which also allowed .45 Colt ammunition to be fired.[7]
Multiple cartridge capabilities
Mateba Autorevolvers chambered in .357 Magnum can be loaded with .38 Special ammunition. Typical .38 Special loads do not have enough power to fully cycle the recoil mechanism, but the weapon will still function with a double-action trigger pull.[1] There are two optional recoil springs designed specifically for .38 Special cartridges that can be installed by the operator to overcome this problem (.38 Special and .38 wadcutter). Replacing the spring requires the removal of the slide assembly, which is blocked by a retaining pin held in place by a small set screw in the triggerguard. The barrel shroud acts as the spring keeper and guide rod bushing.
See also
- Chiappa Rhino, also designed by Emilio Ghisoni, using many similar characteristics
- Revolver cannon
- Webley-Fosbery, another autorevolver design
References
- ^ a b Mateba Model 6 Unica. Retrieved on August 19, 2008.
- ^ Mateba, the future of revolvers?. Retrieved on August 19, 2008.
- ^ MATEBA AutoRevolver 6-Defence. Retrieved on August 19, 2008.
- ^ MATEBA AutoRevolver 6-Dynamic Sportiva. Retrieved on August 19, 2008.
- ^ MATEBA AutoRevolver 6-Home Protection. Retrieved on August 19, 2008.
- ^ MATEBA AutoRevolver 6-Hunter. Retrieved on August 19, 2008.
- ^ MATEBA Grifone. Retrieved on August 19, 2008.