MyRIO

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 122.171.227.29 (talk) at 16:08, 4 December 2016 (added to similar products). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

MyRIO
ManufacturerNational Instruments
AvailableIn production
Websitewww.ni.com/myrio

MyRIO is a real-time embedded evaluation board made by National Instruments. It is used to develop applications that utilize its onboard FPGA and microprocessor. It requires LABVIEW. Its geared towards students and basic applications.[1]

Specifications

(for myRIO-1900)

  • Xilinx Z-7010 processor 667 MHz (ARM Cortex A9 x2 cores 28 nm process NEON SIMD, VFPv3 Vector Float)
  • Memory: NV: 256 MB, DDR3 512MB, 533 MHz, 16 bits
  • FPGA type same as processor
  • Wireless: IEEE 802.11 b,g,n ISM 2.4 GHz 20 MHz.
  • USB 2.0 Hi-Speed
  • Breakout Board support
  • 2 ports of 16 Digital I/O lines
  • 3 axis accelerometer
  • Max power consumption : 14 W
  • Typical idle : 2.6 W
  • LED's

Similar products

cRIO (compactRIO) myDAQ

References

  1. ^ "From Student to Engineer: Preparing Future Innovators With the NI LabVIEW RIO Architecture — National Instruments". Ni.com. 2014-04-01. Retrieved 2016-07-26.
Retrieved from "https://en.wikipedia.org/w/index.php?title=MyRIO&oldid=752995805"