Panel edge staining
![]() | This article includes a list of general references, but it lacks sufficient corresponding inline citations. (November 2010) |
![Panel edge staining](http://upload.wikimedia.org/wikipedia/commons/thumb/c/c9/Paneledgestaining.jpg/220px-Paneledgestaining.jpg)
Panel edge staining is a naturally occurring problem that occurs to anodized aluminium and stainless steel[1] paneling and facades. It is semi-permanent staining that dulls the panel or facades surface (in particular the edges of the paneling), reducing the natural luster and shine produced by the anodizing processes used on the aluminium. Panel edge staining may also appear on powder coated aluminium, painted aluminium, stainless steel and titanium surfaces.
Causes
Panel edge staining is the by-product of the build-up of dirt and pollution. It is especially more noticeable on buildings using metallic facades in Asia, and regions close to the equator (such as Florida or South East Asia), as higher rates of air pollution,[2] high levels of humidity and consistent rainfall encourage panel edge staining to develop.
The unique top to bottom stain pattern of panel edge staining is caused when the build-up of dirt and pollution is washed from the higher panels to the lower panels of a surface by natural precipitation.[3]
Notes
- ^ "Stainless Steel Staining" (PDF).
- ^ "Pollution in South East Asia".
- ^ "Solid Aluminum Panels for Exterior Wall Cladding" (PDF). Retrieved August 30, 2012.
References
- Davis, Joseph R. (1999). Corrosion of Aluminum and Aluminum Alloys. ASM International. p. 197. ISBN 978-0-87170-629-4.
- Staining of facades By Michael Y. L. Chew, Tan Phay Ping
- Maintenance and Restoration of Architectural Aluminum By Service One, Inc. Technical Paper