Parallel Peripheral Interface

Edit links
From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Dave.Dunford (talk | contribs) at 18:41, 18 January 2018 (c/e). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

The Parallel Peripheral Interface (PPI) is a peripheral found on the Blackfin embedded processor. The PPI is a half-duplex, bi-directional port that is designed to connect directly to LCDs, CMOS sensors, CCDs, video encoders (video DACs), video decoders (video ADCs) or any generic high speed, parallel device.

The width of the PPI is programmable and can be set between 8 and 16 bits in 1-bit increments. The latest Blackfin family (BF54x) also features an 18/24-bit PPI for direct connection to RGB LCD panels.

The PPI can run from 0 MHz up to 66 MHz.

The PPI has a dedicated clock pin, three multiplexed frame sync pins, and between 16 and 24 data pins.

References

http://blackfin.uclinux.org/doku.php?id=ppi


Stub icon

This computer hardware article is a stub. You can help Wikipedia by expanding it.

Retrieved from "https://en.wikipedia.org/w/index.php?title=Parallel_Peripheral_Interface&oldid=821152010"