Polishing
 | This article needs additional citations for verification. (September 2014) |
Polishing is the process of creating a smooth and shiny surface by rubbing it or using a chemical action, leaving a surface with a significant specular reflection (still limited by the index of refraction of the material according to the Fresnel equations.)[1] In some materials (such as metals, glasses, black or transparent stones), polishing is also able to reduce diffuse reflection to minimal values. When an unpolished surface is magnified thousands of times, it usually looks like mountains and valleys. By repeated abrasion, those "mountains" are worn down until they are flat or just small "hills." The process of polishing with abrasives starts with coarse ones and graduates to fine ones.
Mechanical properties
The strength of polished products is normally higher than their rougher counterpart owing to the removal of stress concentrations present in the rough surface. They take the form of corners and other defects which magnify the local stress beyond the inherent strength of the material.
Polishing with very fine abrasive differs physically from coarser abrasion, in that material is removed on a molecular level, so that the rate is correlated to the boiling point rather than to the melting point of the material being polished.[citation needed]
Types
Metalworking
Other polishing processes include:
Woodworking
Other
- Chemical-mechanical polishing, which is used in semiconductor fabrication
- Fabrication and testing of optical components
- Flame polishing, a type of polishing used on glass and thermoplastics
- Ultra-fine, abrasive paste polishing, polishing for soft or fragile work surfaces
- Vapor polishing, a method of polishing plastics to optical clarity
- 4 Steps of Marble Polishing
References
