Jump to content

Pulsed rocket motor

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Sngineer (talk | contribs) at 18:01, 5 December 2015 (removing detail about a single implementation because there are also many other rockets that also used pulsed engines to preserve article focus.). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

A pulsed rocket motor is typically defined as a multiple Pulse (physics) solid-fuel rocket motor. This design overcomes the limitation of solid propellant motors that they cannot be easily shut down and reignited. The pulse rocket motor allows the motor to be burned in segments (or pulses) that burn until completion of that segment. The next segment (or pulse) can be ignited on command by either an onboard algorithm or in pre-planned phase. All of the segments are contained in a single rocket motor case as opposed to staged rocket motors.[1]

The pulsed rocket motor is made by pouring each segment of propellant separately. Between each segment is a barrier that prevents the other segments from burning until ignited. At ignition of a second pulse the burning of the propellant generally destroys the barrier.

The benefit of the pulse rocket motor is that by the command ignition of the subsequent pulses, near optimal energy management of the propellant burn can be accomplished. Each pulse can have different thrust level, burn time, and achieved specific impulse depending on the type of propellant used, its burn rate, its grain design, and the current nozzle throat diameter.[2]


References

  1. ^ Jensen, G.E, & Netzer D.W. Tactical Missile Propulsion, AIAAProgress in Astronautics and Aeronautics Volume 170 1996
  2. ^ Phillips, C.A, "Energy Management for a Multiple Pulse Missile", AIAA Paper 88-0334, Jan., 1988

See also