Jump to content

Regenerative thermal oxidizer

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 182.210.11.192 (talk) at 09:31, 17 March 2016. The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

File:Haase Lubeck MBT.JPG
Anaerobic digestion & regenerative thermal oxidiser (left) component of Mechanical biological treatment at Lübeck in Germany, 2007

A regenerative thermal oxidizer (RTO) is an industrial process for the treatment of exhaust air. The system is a type of thermal oxidizers that uses a bed of ceramic material to absorb heat from the exhaust gas. It then uses this captured heat to preheat the incoming process gas stream and destroy air pollutants emitted from process exhaust streams at temperatures ranging from 815 °C (1,500 F) to 980 °C (1,800 F).

These gas streams are usually produced by processes requiring ventilation, including paint booths, printing, and paper mills. Municipal waste treatment facilities such as mechanical biological treatment plants are required by law in Germany to incorporate these systems. Biological alternatives to this system include biofilters and bioscrubbers.

They are suited to applications with low VOC concentrations but high waste stream flow rates. This is due to their high thermal energy recovery. The basic operation of an RTO consists of passing a hot gas stream over a heat sink material in one direction and recovering that heat by passing a cold gas stream through that same heat sink material in an alternate cycle. They are used to destroy air toxics and VOCs that are discharged in industrial process exhausts.

The following manufacturers have been involved in the development, design and planning of waste gas purification systems for a wide range of industries: Global manufacture of turnkey systems

  • Tann Corporation (Kaukauna, WI), [1]
  • Lundberg (Bellevue, WA),[2]
  • Eisenmann AG with its headquarters in Germany and RTO core business in USA,[3]
  • Cycle Therm (Menomonie, WI),[4]
  • B&W MEGTEC Systems,[5] located in DePere Wisconsin, USA.
  • Banks Engineering,[6]
  • Colt Technologies (Dallas, TX) www.colttechnologies.net
  • The CMM Group,[7] located in De Pere, Wisconsin;
  • CTP Air Pollution Control,[8]
  • Epcon Industrial Systems, LP.[9]
  • WK Asia-Pacific Environmental Pte Ltd,[10] located in German Center, Singapore,
  • NESTEC,[11]
  • Dürr Systems, Inc.,[12] headquartered in Germany with U.S. Headquarters in Plymouth, Michigan
  • Process combustion Ltd.,[13] located in the United Kingdom
  • Anguil.,[14] and
  • American Fabrication and Supply,[15]
  • Kentec. located in South Korea.[16]

They produce systems to remove:

The industries they currently serve are:

  • Ethanol Industry
  • Coal Mining Industry (VAM)
  • Car manufacturing
  • Packaging/printing
  • Brick
  • Paint shop
  • Chemical
  • Pharmaceutical
  • Electrical
  • Plastics
  • Food processing
  • Printing
  • Foundries
  • Semiconductor
  • Metallurgical
  • Sewage sludge treatment
  • Metal recycling
  • Wood


Different solutions to the waste gas problems of one of the mentioned industries are available:

References