Jump to content

SEAC (computer)

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 89.25.210.104 (talk) at 17:15, 21 September 2018 (→Applications: computer animation of the city traffic simulation). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

SEAC 1n 1950
SEAC's "last printout," November 1954. However SEAC was reassembled successfully and ran for another ten years until its dismantling in 1964. Printout reads: WIPE YOUR EYE5…… I GO AWAY .%………..-

SEAC (Standards Eastern Automatic Computer[1] or Standards Electronic Automatic Computer)[2] was a first-generation electronic computer, built in 1950 by the U.S. National Bureau of Standards (NBS) and was initially called the National Bureau of Standards Interim Computer, because it was a small-scale computer designed to be built quickly and put into operation while the NBS waited for more powerful computers to be completed (the DYSEAC). The team that developed SEAC was organized by Samuel N. Alexander.[3] SEAC was demonstrated in April 1950 and was dedicated on June 1950;[4][5][6] it is claimed to be the first fully operational stored-program electronic computer in the US.[7]

Description

Based on EDVAC, SEAC used only 747 vacuum tubes (a small number for the time) eventually expanded to 1,500 tubes. It had 10,500 germanium diodes which performed all of the logic functions (see the article diode–transistor logic for the working principles of diode logic), later expanded to 16,000 diodes. It was the first computer to do most of its logic with solid-state devices. The tubes were used for amplification, inversion and storing information in dynamic flip-flops.[8] The machine used 64 acoustic delay lines to store 512 words of memory, with each word being 45 bits in size. The clock rate was kept low (1 MHz).

The computer's instruction set consisted of only 11 types of instructions: fixed-point addition, subtraction, multiplication, and division; comparison, and input & output. It eventually expanded to 16 instructions.

The addition time was 864 microseconds and the multiplication time was 2,980 microseconds (i.e. close to 3 milliseconds).

Weight: 3,000 pounds (1.5 short tons; 1.4 t) (Central Machine).[2]

Applications

On some occasions SEAC was used by a remote teletype. This makes it one of the first computers to be used remotely. With many modifications, it was used until 1964. Some of the problems run on it dealt with:

  • SEAC block diagram
    SEAC block diagram
  • SEAC input/output diagram
    SEAC input/output diagram
  • Magnetic wire drives and cartridges
    Magnetic wire drives and cartridges
  • Offline magnetic wire to paper tape & print station
    Offline magnetic wire to paper tape & print station
  • SEAC scanner
    SEAC scanner
  • First image scanned into SEAC, son of Russell A. Kirsch
    First image scanned into SEAC, son of Russell A. Kirsch
  • Samuel N. Alexander with SEAC
    Samuel N. Alexander with SEAC
  • Horace Joseph and George A. Moore using the SEAC image scanner to analyze metallurgical photographs in 1960. Moore was legally blind.[11]
    Horace Joseph and George A. Moore using the SEAC image scanner to analyze metallurgical photographs in 1960. Moore was legally blind.[11]
  • SEAC wiring
    SEAC wiring
  • Ethel Marden at the control console of SEAC in 1959
    Ethel Marden at the control console of SEAC in 1959

See also

References

  1. ^ http://www.computerhistory.org/timeline/?year=1950
  2. ^ a b 1955 BRL report
  3. ^ "Obituary: Samuel Alexander, NBS Senior Research Fellow". Physics Today. 21 (4): 131. April 1968. doi:10.1063/1.3034910. Archived from the original on 2013-09-23. {{cite journal}}: Unknown parameter |dead-url= ignored (|url-status= suggested) (help)
  4. ^ Lee, John A. N.; Lee, J. A. N. (1995). International Biographical Dictionary of Computer Pioneers. Taylor & Francis. p. 237. ISBN 9781884964473.
  5. ^ "3. SEAC (Formerly called NBS Interim Computer)". Digital Computer Newsletter. 2 (3): 1–2. 1950-08-01.
  6. ^ News - National Bureau of Standards 1950, p. 239.
  7. ^ Kirsch, Russell (1 Sep 2000). "Computer Development at the National Bureau of Standards". NIST Special Publication. 958: 86–89. Retrieved 23 May 2018.
  8. ^ Glen G. Jr. Langdon (2012). Logic Design: A Review Of Theory And Practice. Elsevier. p. 7. ISBN 032316045X.
  9. ^ "ARTICLES: City Traffic Simulated by Computer". Computers and Automation. XI (5). 196205.pdf: 23–26. May 1962.{{cite journal}}: CS1 maint: others (link)
  10. ^ "Computer simulation of street traffic". NBS Technical Notes. www.gpo.gov. January 1, 1961: 1, 5, 10–11. {{cite journal}}: Cite journal requires |journal= (help)
  11. ^ Metallography--past, Present, and Future: 75th Anniversary Volume, Issue 1165, George F. Vander Voort, p.14
  • Williams, Michael R. (1997). A History of Computing Technology. IEEE Computer Society.
  • Metropolis, N; Howlett, J.; Rota, Gian-Carlo (editors) (1980). A History of Computing in the Twentieth Century. Academic Press. (The chapter "Memories of the Bureau of Standards' SEAC", by Ralph J. Slutz.)
  • Astin, A. V. (1955), Computer Development (SEAC and DYSEAC) at the National Bureau of Standards, Washington D.C., National Bureau of Standards Circular 551, Issued January 25, 1955, U.S. Government Printing Office. Includes several papers describing SEAC, its technical details, and its operation. In particular, see "SEAC", by S. Greenwald, S. N. Alexander, and Ruth C. Haueter, on pp. 5–26, for an overview of the SEAC system.

Further reading

Wikimedia Commons has media related to SEAC computer.
Retrieved from "https://en.wikipedia.org/w/index.php?title=SEAC_(computer)&oldid=860581772"