Jump to content

Sodium methoxide

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by CheMoBot (talk | contribs) at 15:08, 30 December 2011 (Updating {{chembox}} (no changed fields - added verified revid - updated 'DrugBank_Ref', 'ChEMBL_Ref', 'ChEBI_Ref', 'KEGG_Ref') per Chem/Drugbox validation (report errors or [[user talk:Che...). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Sodium methoxide
Ball-and-stick model of the methoxide anion
Ball-and-stick model of the methoxide anion
The sodium cation
The sodium cation
Names
IUPAC name
sodium methoxide
Other names
sodium methylate
Identifiers
3D model (JSmol)
ChemSpider
ECHA InfoCard 100.004.273 Edit this at Wikidata
UNII
  • InChI=1S/CH3O.Na/c1-2;/h1H3;/q-1;+1 checkY
    Key: WQDUMFSSJAZKTM-UHFFFAOYSA-N checkY
  • InChI=1/CH3O.Na/c1-2;/h1H3;/q-1;+1
    Key: WQDUMFSSJAZKTM-UHFFFAOYAC
  • [Na+].[O-]C
Properties
CH3NaO
Molar mass 54.02
Appearance white solid
Melting point >300 °C
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
checkY verify (what is checkY☒N ?)

Sodium methoxide is a chemical compound, with formula CH3ONa. This colourless solid, which is formed by the deprotonation of methanol, is a widely used reagent in industry and the laboratory. It is also a dangerously caustic base.

Preparation and structure

Sodium methoxide is prepared by carefully treating methanol with sodium:

2 Na + 2 CH
3
OH
→ 2 CH
3
ONa
+ H
2

The reaction is so exothermic that ignition is possible. The resulting solution, which is colorless, is often used as a source of sodium methoxide, but the pure material can be isolated by evaporation followed by heating to remove residual methanol. The solid hydrolyzes in water to give sodium hydroxide, and commercial samples can be contaminated with the hydroxide. The solid and especially solutions absorb carbon dioxide from the air, thus diminishing the effectiveness of the base.

In the solid form, sodium methoxide is polymeric, with a sheet-like arrays of Na+ centers, each bonded to four oxygen centers.[1]

The structure, and hence its basicity, of sodium methoxide in solution depends on the solvent. It is significantly stronger base in DMSO where it is more fully ionized and free of hydrogen bonding.[2]

Applications

Organic synthesis

Sodium methoxide is a routine base in organic chemistry, applicable to the synthesis of numerous compounds, ranging from pharmaceuticals to agrichemicals.[2] As a base, it is employed in dehydrohalogenations and various condensations.[3] It is also a nucleophile for the production of methyl ethers.[4]

Industrial applications

Sodium methoxide is used as an initiator of anionic addition polymerization with ethylene oxide, forming a polyether with high molecular weight. Biodiesel is prepared from vegetable oils and animal fats, that is, fatty acid triglycerides, by transesterification with methanol to give fatty acid methyl esters (FAMEs). This transformation is catalyzed by sodium methoxide.

Safety

Sodium methoxide is highly caustic, and the hydrolysis gives methanol, which is toxic and volatile.

References

  1. ^ E. Weiss, “Die Kristallstruktur des Natriummethylats” Zeitschrift fur Anorganische und Allgemeine Chemie 1964, volume 332, p. 197-203. doi:10.1002/zaac.19643320311
  2. ^ a b Y. El-Kattan, J. McAtee, B. Bessieres “Sodium Methoxide” in Encyclopedia of Reagents for Organic Synthesis, John Wiley & Sons, 2006, New York. doi:10.1002/047084289X.rs089m.pub2. Article Online Posting Date: September 15, 2006.
  3. ^ Omer E. Curtis, Jr., Joseph M. Sandri, Richard E. Crocker, Harold Hart (1963). "dicyclopropyl ketone". Organic Syntheses{{cite journal}}: CS1 maint: multiple names: authors list (link); Collected Volumes, vol. 4, p. 278.
  4. ^ Frederic Reverdin (1941). "3,5-Dinitroanisole". Organic Syntheses; Collected Volumes, vol. 1, p. 219.

yyy

See also