Jump to content

Split beam nut

Add links
From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 85.255.235.47 (talk) at 20:46, 26 January 2016. The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

GA split beam nut, also known as a split hex nut[1] or slotted beam nut,[2] is a locknut with slots cut in the top that separate the outside end into two[3] or more sections that are bent slightly inward, making the thread diameter undersized in the slotted portion. As the nut is threaded on, these sections are forced back out to their original position and increase the friction between the nut and the fastener, creating the locking action.

High temperature use

High strength grades retain their locking ability up to 1,400 °F (760 °C), unlike nyloc nuts. Military grade nuts can be reused at least a dozen times.[2]

Trademark

Aerotight is a tradename for a specific type of split beam nut.[3] Other names for this type of nut are stiff nut and Allmetal self locking nut.

See also

References

Notes

  1. ^ Slotted hex, retrieved 2008-11-30.
  2. ^ a b Smith, p. 105
  3. ^ a b Aerotight (PDF), retrieved 2016-01-26.

Bibliography

Retrieved from "https://en.wikipedia.org/w/index.php?title=Split_beam_nut&oldid=701829115"