Steering linkage
Appearance
![]() | This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these template messages)
|
![](http://upload.wikimedia.org/wikipedia/commons/thumb/b/be/Steer_system.jpg/220px-Steer_system.jpg)
A steering linkage is the part of an automotive steering system that connects to the front wheels.[1]
The steering linkage which connects the steering gearbox to the front wheels consists of a number of rods. These rods are connected with a socket arrangement similar to a ball joint, called a tie rod end, allowing the linkage to move back and forth freely so that the steering effort will not interfere with the vehicles up-and-down motion as the wheel moves over roads. The steering gears are attached to a rear rod which moves when the steering wheel is turned. The rear rod is supported at one end.
Technology
[edit]Most modern cars have a fully mechanical steering linkage system, but a recent innovation is the steer by wire system.
Example Simulations
[edit]-
Ackermann steering
-
Bell-crank steering
-
Rack-and-pinion steering
-
Short rack-and-pinion steering
See also
[edit]References
[edit]- ^ "What Is Steering Linkage? - UTI". UTI Corporate. Retrieved 2022-05-23.