Jump to content

Tatra 163

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by FrescoBot (talk | contribs) at 03:30, 18 December 2015 (Bot: link syntax). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Tatra T 163 Jamal
Overview
ManufacturerTatra
Production1999 - present
AssemblyKopřivnice, Moravia, Czech Republic
Body and chassis
ClassHeavy truck
Body styleconventional
Powertrain
EngineTatra diesel air-cooled V8
270kW-325kW
TransmissionTatra
  • 10 speed manual
  • 14 speed manual
Auxiliary Tatra two-speed
Dimensions
Wheelbase3,700 mm (145.7 in) + 1,450 mm (57.1 in)
4,090 mm (161.0 in) + 1,450 mm (57.1 in)
Length7,990 mm (314.6 in)
8,480 mm (333.9 in)
Width2,550 mm (100.4 in)
Height3,400 mm (133.9 in)
Curb weight10,420 kg (22,970 lb) empty
38,000 kg (84,000 lb) loaded
Chronology
PredecessorTatra T148
Tatra Jamal Evo IV
Overview
ManufacturerTatra
Production2003
AssemblyKopřivnice, Moravia, Czech Republic
Body and chassis
ClassRace truck
Body styleconventional
Powertrain
EngineSMR 126 R straight 6
932kW (1250HP)[1]
TransmissionZF HP 600 five-speed automatic[1]
Dimensions
Wheelbase3,800 mm (149.6 in)[1]
Length5,050 mm (198.8 in)[1]
Width2,550 mm (100.4 in)[1]
Height2,550 mm (100.4 in)[1]
Curb weight4,800 kg (10,600 lb)[1]

Tatra T 163 Jamal (dubbed after the Yamal Peninsula in Siberia, Russia) is a heavy truck made by Czech company Tatra. It uses the traditional Tatra concept of rigid backbone tube and swinging half-axles giving independent suspension. The vehicles are available primarily in 6x6 and alternatively also 4x4 variants. It is marketed either as road-legal heavy truck (tipper or semi-trailer truck) or as working machine (to be used i.e. in mines). The T163 is continuation of tradition started with Tatra T 111, which played crucial role in effort to rebuild Central and Eastern Europe after the WW2 as well as in conquering the Russian Far East.

History

At the beginning of the 1980s both conventional Tatra T 148 and COE Tatra T 813s were succeeded by the single line of COE Tatra T 815s. However Tatra aimed to develop a conventional heavy dump truck for use in the hardest of conditions (i.e. mines). This led to the Tatra T 162 prototype, which wasn't introduced into serial production. Later in 1995 the first prototype of the upcoming T 163 line was constructed, though it was designated as T-815-24BSK8. The traditional design offers higher safety for the driver and easier access to the engine. The bonnet is made from a light laminate and it folds forward.[2]

A truck with conventional setting of cabin was demanded especially by Tatra's customers from Russian Siberia (where Tatra's air-cooled engines require less maintenance compared to water-cooled ones). The main reason, why the conventional cab is preferred, is that the driver may warm up in the cabin even during a potential on-road engine repair (the cabin has independent heating).[3]

During 1995-1998 a number of prototypes were manufactured. Since 1997 a prototype was tested in the most demanding environment of Arctic Siberia, later to be handed over to a gas drilling company.[4] In 1998 the bonnet is shortened by 295 mm to comply to directives concerning maximum length of truck and trailer. In 1999 the truck is certified for use on the roads of the Czech Republic, Slovakia and Russia and later the same year the full production began.[2]

References

  1. ^ a b c d e f g "Tatra Jamal EVO IV". csms.cz (in Czech). Retrieved 2010-09-01.
  2. ^ a b ":Tatrapage:Tatra 163". tatra-page.kx.cz (in Czech). Retrieved 2010-08-23.
  3. ^ "Svět motorů: Tatra Jamal a spol". Svět motorů 45/2001 (in Czech). Retrieved 2010-08-23.
  4. ^ "Automobil:Návrat kapotových vozů - T163 Jamal". Automobil 8/1999 (in Czech). Retrieved 2010-08-23.