Jump to content

Torque-to-yield fastener

Add links
From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by BG19bot (talk | contribs) at 03:21, 4 May 2016 (WP:CHECKWIKI error fix. Section heading problem. Violates WP:MOSHEAD.). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

A torque to yield fastener (TTY) is mounting hardware in the form of a fastener which is torqued beyond the state of elasticity and therefore undergoes plastic deformation, causing it to become permanently elongated.[1] Torquing a fastener to yield results in a high preloading of the fastener which, depending on the load frequency and amplitude, can significantly increase the fatigue life of the fastener. When the applied load doesn't surpass the clamping force of the fastener, the strain of the fastener will be lower than when the preloading is smaller than the applied load. It is therefore beneficial in high-frequency high-load situations with a higher risk of fatigue related failure, like a bolted down cylinder head, to use torque to yield bolts.

Advantages and Disadvantages

(+) Compared to normally tightened hardware, a smaller sized TTY bolt/screw may be used while still maintaining the same clamping force.

(-) A drawback with TTY hardware is that it normally has to be replaced when loosened, for example when the cylinder head is removed.[2]

References

  1. ^ http://www.enginebuildermag.com/Article/2343/threaded_fasteners_torquetoyield_and_torquetoangle.aspx
  2. ^ http://www.aa1car.com/library/torque_to_yield_tty_head_bolt_tips.htm
Retrieved from "https://en.wikipedia.org/w/index.php?title=Torque-to-yield_fastener&oldid=718539092"