Vacuum cooling
 | This article contains promotional content. (May 2020) |
 | This article includes a list of general references, but it lacks sufficient corresponding inline citations. (October 2016) |
Vacuum cooling is a rapid cooling technique for any porous product that has free water and uses the principle of evaporative cooling. Vacuum cooling is generally used for cooling food products that have a high water content and large porosities, due to its efficacy in losing water from both within and outside the products. (Lettuce is an example of vacuum cooled products.) This is the most widely used technique for rapid cooling of food products which has been proven to be one of the most efficient and economical methods of cooling and storage of vegetables, fruits, flowers, and more.[1][2][3]
This cooling technology not only largely improves the product quality, but also increases the shelf life of the product and, at the same time, it reduces the cooling costs compared to the conventional cooling methods available.[4]
Principle
[edit]The technology is based on the phenomenon that as the vapor pressure on a liquid reduces, its boiling point reduces. The boiling point of a liquid is defined as the temperature at which the vapor pressure of the liquid is equal to the external pressure. When the pressure put onto a liquid is reduced, the vapor pressure needed to induce boiling is also reduced, and therefore the boiling point of the liquid decreases. By reducing pressure, boiling water is possible at lower temperatures. This rapid evaporation of moisture from the surface and within the products due to the low surrounding pressure absorbs the necessary latent heat for phase change from the product itself. This latent heat required for evaporation is obtained mostly from the sensible heat of the product and as a consequence of this evaporation the temperature of the product falls and the product can be cooled down to its desired storage temperature.[2][5]
Process
[edit]An airtight chamber is maintained by removing air from the inside of the chamber using a vacuum pump. The products to be cooled are kept in that airtight chamber. As the pressure is reduced the boiling point of water reduces and water starts to evaporate, taking heat from the product. As a consequence of this evaporation, the product temperature begins to decrease. This cooling process of the products continues until it reaches the desired product temperature.[3][6][7]
For maintaining a steady cooling process, it is necessary to evacuate the chamber continuously.[8] Other factors that determine the cooling process are the surface area of the product that is available for heat transfer as well as the product's sensitivity to losing water.[9]
Advantages
[edit]As the product is cooled uniformly throughout the body without any temperature gradient in the body, the shelf life of the product increases.[10][11][12][13]
Cooling the product through vacuum cooling takes roughly a quarter of the energy of other traditional cooling methods.[1]
Disadvantage
[edit]Sometimes excess moisture loss during the cooling process will deteriorate the product's quality and therefore there is a limit to the cooling process. This problem is to be taken care of by maintaining the required pressure, temperature, and time of cooling.[12][13]
References
[edit]- ^ a b "Vacuum keeps food fresh and cool from field to table". Physics World. 2019-08-14. Retrieved 2022-07-31.
- ^ a b "Principles of Vacuum Cooling | Precooling Solutions". agrimaint.com. Retrieved 2022-07-31.
- ^ a b "How Vacuum Coolers Work | Precooling Solutions". agrimaint.com. Retrieved 2022-07-31.
- ^ lal Basediya, Amrat; Samuel, D. V. K.; Beera, Vimala (June 2013). "Evaporative cooling system for storage of fruits and vegetables - a review". Journal of Food Science and Technology. 50 (3): 429–442. doi:10.1007/s13197-011-0311-6. ISSN 0022-1155. PMC 3602570. PMID 24425938.
- ^ McDonald, Karl; Sun, Da-Wen (October 2000). "Vacuum cooling technology for the food processing industry: a review". Journal of Food Engineering. 45 (2): 55–65. doi:10.1016/S0260-8774(00)00041-8.
- ^ Baas, Raoul Alderse (2019-01-08). "Vacuum cooling process". Webercooling. Retrieved 2022-07-31.
- ^ "Cooling methods | Cooling and storage | Postharvest fundamentals". www.postharvest.net.au. Retrieved 2022-07-31.
- ^ "Industrial Vacuum Cooling: A New Perspective For The Food Industry". BVT. 2019-11-13. Retrieved 2022-07-31.
- ^ He, Su-Yan; Li, Yun-Fei (October 2003). "Theoretical simulation of vacuum cooling of spherical foods". Applied Thermal Engineering. 23 (12): 1489–1501. doi:10.1016/S1359-4311(03)00085-1.
- ^ PhD, Lin Carson (2022-03-04). "Advantages of Vacuum Cooling". BAKERpedia. Retrieved 2022-07-31.
- ^ "Benefits of Vacuum Cooling | Precooling Solutions". agrimaint.com. Retrieved 2022-07-31.
- ^ a b "Advantages and disadvantages of vacuum cooling system". Dongguan COLDMAX Ltd. Retrieved 2022-07-31.
- ^ a b "Advantages and Disadvantages of Vacuum Cooling - OTS test equipment". www.ots-testequipment.net. Retrieved 2022-07-31.
- H.M. Ozturk, H.K. Ozturk, Effect of pressure on the vacuum cooling of iceberg lettuce Int. J. Refrig. Revue Int. Du. Froid, 32 (3) (2009), pp. 402–410
- Feng, Chaohui; Drummond, Liana; Zhang, Zhihang; Sun, Da-Wen; Wang, Qijun (2012). "Vacuum Cooling of Meat Products: Current State-of-the-Art Research Advances". Critical Reviews in Food Science and Nutrition. 52 (11): 1024–1038. doi:10.1080/10408398.2011.594186. PMID 22823349. S2CID 34953281.
- http://issuu.com/coldmax/docs/coldmax_web_uk/1