Jump to content

Wuhan Junshan Yangtze River Bridge

Coordinates: 30°22′27″N 114°08′25″E / 30.374028°N 114.140278°E / 30.374028; 114.140278
From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by American Money (talk | contribs) at 17:54, 21 May 2018 (added Category:2001 establishments in China using HotCat). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Wuhan Junshan Yangtze River Bridge

武汉军山长江大桥
Coordinates30°22′27″N 114°08′25″E / 30.374028°N 114.140278°E / 30.374028; 114.140278
Carries G4 Beijing–Hong Kong–Macau Expressway
G50 Shanghai–Chongqing Expressway
G4201 Wuhan Ring Expressway
CrossesYangtze River
LocaleWuhan, Hubei, China
Other name(s)Wuhan Bridge No. 4
Characteristics
DesignCable-stayed
Total length2,847 metres (9,341 ft)
Longest span460 metres (1,510 ft)
History
Construction start1998
Construction end2001
Location
Map

The Wuhan Junshan Yangtze River Bridge is a large cable-stayed bridge over the Yangtze River. The bridge carries 6 lanes of traffic between the Caidian District and the Jiangxia District of Wuhan, Hubei. A concurrency of expressways go over the bridge: The G4 Beijing–Hong Kong–Macau Expressway, the G50 Shanghai–Chongqing Expressway, and the G4201 Wuhan Ring Expressway. The bridge, which was opened in 2001, is one of the largest cable-stayed bridges in the world.[1][2][3]

The bridge is named for Junshan (军山, "the Army Mountain"), a lone mountain on the left bank of the Yangtze upstream from the bridge.

References

  1. ^ "Nonlinear Earthquake-Response Analysis of Wuhan Junshan Yangtze River under Uniform and Non-Uniform Excitations". Retrieved February 14, 2013.
  2. ^ "武汉军山长江大桥". 中国桥梁网. Retrieved 2011-12-26.
  3. ^ 武汉军山长江大桥

See also