Jump to content

Discrete Fourier transform over a ring

From Wikipedia, the free encyclopedia

In mathematics, the discrete Fourier transform over a ring generalizes the discrete Fourier transform (DFT), of a function whose values are commonly complex numbers, over an arbitrary ring.

Definition

[edit]

Let R be any ring, let be an integer, and let be a principal nth root of unity, defined by:[1]

(1)

The discrete Fourier transform maps an n-tuple of elements of R to another n-tuple of elements of R according to the following formula:

(2)

By convention, the tuple is said to be in the time domain and the index j is called time. The tuple is said to be in the frequency domain and the index k is called frequency. The tuple is also called the spectrum of . This terminology derives from the applications of Fourier transforms in signal processing.

If R is an integral domain (which includes fields), it is sufficient to choose as a primitive nth root of unity, which replaces the condition (1) by:[1]

for
Proof

Take with . Since , , giving:

where the sum matches (1). Since is a primitive root of unity, . Since R is an integral domain, the sum must be zero. ∎

Another simple condition applies in the case where n is a power of two: (1) may be replaced by .[1]

Inverse

[edit]

The inverse of the discrete Fourier transform is given as:

(3)

where is the multiplicative inverse of n in R (if this inverse does not exist, the DFT cannot be inverted).

Proof

Substituting (2) into the right-hand-side of (3), we get

This is exactly equal to , because when (by (1) with ), and when . ∎

Matrix formulation

[edit]

Since the discrete Fourier transform is a linear operator, it can be described by matrix multiplication. In matrix notation, the discrete Fourier transform is expressed as follows:

The matrix for this transformation is called the DFT matrix.

Similarly, the matrix notation for the inverse Fourier transform is

Polynomial formulation

[edit]

Sometimes it is convenient to identify an n-tuple with a formal polynomial

By writing out the summation in the definition of the discrete Fourier transform (2), we obtain:

This means that is just the value of the polynomial for , i.e.,

(4)

The Fourier transform can therefore be seen to relate the coefficients and the values of a polynomial: the coefficients are in the time-domain, and the values are in the frequency domain. Here, of course, it is important that the polynomial is evaluated at the nth roots of unity, which are exactly the powers of .

Similarly, the definition of the inverse Fourier transform (3) can be written:

(5)

With

this means that

We can summarize this as follows: if the values of are the coefficients of , then the values of are the coefficients of , up to a scalar factor and reordering.[2]

Special cases

[edit]

Complex numbers

[edit]

If is the field of complex numbers, then the th roots of unity can be visualized as points on the unit circle of the complex plane. In this case, one usually takes

which yields the usual formula for the complex discrete Fourier transform:

Over the complex numbers, it is often customary to normalize the formulas for the DFT and inverse DFT by using the scalar factor in both formulas, rather than in the formula for the DFT and in the formula for the inverse DFT. With this normalization, the DFT matrix is then unitary. Note that does not make sense in an arbitrary field.

Finite fields

[edit]

If is a finite field, where q is a prime power, then the existence of a primitive nth root automatically implies that n divides , because the multiplicative order of each element must divide the size of the multiplicative group of F, which is . This in particular ensures that is invertible, so that the notation in (3) makes sense.

An application of the discrete Fourier transform over is the reduction of Reed–Solomon codes to BCH codes in coding theory. Such transform can be carried out efficiently with proper fast algorithms, for example, cyclotomic fast Fourier transform.

Polynomial formulation without nth root

[edit]

Suppose . If , it may be the case that . This means we cannot find an root of unity in . We may view the Fourier transform as an isomorphism for some polynomials , in accordance with Maschke's theorem. The map is given by the Chinese remainder theorem, and the inverse is given by applying Bézout's identity for polynomials.[3]

, a product of cyclotomic polynomials. Factoring in is equivalent to factoring the prime ideal in . We obtain polynomials of degree where and is the order of .

As above, we may extend the base field to in order to find a primitive root, i.e. a splitting field for . Now , so an element maps to for each .

When p divides n

[edit]

When , we may still define an -linear isomorphism as above. Note that where and . We apply the above factorization to , and now obtain the decomposition . The modules occurring are now indecomposable rather than irreducible.

Order of the DFT matrix

[edit]

Suppose so we have an root of unity . Let be the above DFT matrix, a Vandermonde matrix with entries for . Recall that since if , then every entry is 1. If , then we have a geometric series with common ratio , so we obtain . Since the numerator is zero, but so the denominator is nonzero.

First computing the square, . Computing similarly and simplifying the deltas, we obtain . Thus, and the order is .

Normalizing the DFT matrix

[edit]

In order to align with the complex case and ensure the matrix is order 4 exactly, we can normalize the above DFT matrix with . Note that though may not exist in the splitting field of , we may form a quadratic extension in which the square root exists. We may then set , and .

Unitarity

[edit]

Suppose . One can ask whether the DFT matrix is unitary over a finite field. If the matrix entries are over , then one must ensure is a perfect square or extend to in order to define the order two automorphism . Consider the above DFT matrix . Note that is symmetric. Conjugating and transposing, we obtain .

by a similar geometric series argument as above. We may remove the by normalizing so that and . Thus is unitary iff . Recall that since we have an root of unity, . This means that . Note if was not a perfect square to begin with, then and so .

For example, when we need to extend to to get a 5th root of unity. .

For a nonexample, when we extend to to get an 8th root of unity. , so , and in this case and . is a square root of the identity, so is not unitary.

Eigenvalues of the DFT matrix

[edit]

When , we have an root of unity in the splitting field . Note that the characteristic polynomial of the above DFT matrix may not split over . The DFT matrix is order 4. We may need to go to a further extension , the splitting extension of the characteristic polynomial of the DFT matrix, which at least contains fourth roots of unity. If is a generator of the multiplicative group of , then the eigenvalues are , in exact analogy with the complex case. They occur with some nonnegative multiplicity.

Number-theoretic transform

[edit]

The number-theoretic transform (NTT)[4] is obtained by specializing the discrete Fourier transform to , the integers modulo a prime p. This is a finite field, and primitive nth roots of unity exist whenever n divides , so we have for a positive integer ξ. Specifically, let be a primitive th root of unity, then an nth root of unity can be found by letting .

e.g. for ,

when

The number theoretic transform may be meaningful in the ring , even when the modulus m is not prime, provided a principal root of order n exists. Special cases of the number theoretic transform such as the Fermat Number Transform (m = 2k+1), used by the Schönhage–Strassen algorithm, or Mersenne Number Transform[5] (m = 2k − 1) use a composite modulus.

Discrete weighted transform

[edit]

The discrete weighted transform (DWT) is a variation on the discrete Fourier transform over arbitrary rings involving weighting the input before transforming it by multiplying elementwise by a weight vector, then weighting the result by another vector.[6] The Irrational base discrete weighted transform is a special case of this.

Properties

[edit]

Most of the important attributes of the complex DFT, including the inverse transform, the convolution theorem, and most fast Fourier transform (FFT) algorithms, depend only on the property that the kernel of the transform is a principal root of unity. These properties also hold, with identical proofs, over arbitrary rings. In the case of fields, this analogy can be formalized by the field with one element, considering any field with a primitive nth root of unity as an algebra over the extension field [clarification needed]

In particular, the applicability of fast Fourier transform algorithms to compute the NTT, combined with the convolution theorem, mean that the number-theoretic transform gives an efficient way to compute exact convolutions of integer sequences. While the complex DFT can perform the same task, it is susceptible to round-off error in finite-precision floating point arithmetic; the NTT has no round-off because it deals purely with fixed-size integers that can be exactly represented.

Fast algorithms

[edit]

For the implementation of a "fast" algorithm (similar to how FFT computes the DFT), it is often desirable that the transform length is also highly composite, e.g., a power of two. However, there are specialized fast Fourier transform algorithms for finite fields, such as Wang and Zhu's algorithm,[7] that are efficient regardless of whether the transform length factors.

See also

[edit]

References

[edit]
  1. ^ a b c Martin Fürer, "Faster Integer Multiplication", STOC 2007 Proceedings, pp. 57–66. Section 2: The Discrete Fourier Transform.
  2. ^ R. Lidl and G. Pilz. Applied Abstract Algebra, 2nd edition. Wiley, 1999, pp. 217–219.
  3. ^ "Jacksonwalters/DFT-finite-groups". GitHub.
  4. ^ Agarwal, R.; Burrus, C. (April 1974). "Fast Convolution using fermat number transforms with applications to digital filtering". IEEE Transactions on Acoustics, Speech, and Signal Processing. 22 (2): 87–97. doi:10.1109/TASSP.1974.1162555. ISSN 0096-3518.
  5. ^ Rader, C.M. (December 1972). "Discrete Convolutions via Mersenne Transforms". IEEE Transactions on Computers. C-21 (12): 1269–1273. doi:10.1109/T-C.1972.223497. ISSN 0018-9340. S2CID 1939809.
  6. ^ Crandall, Richard; Fagin, Barry (1994), "Discrete weighted transforms and large-integer arithmetic" (PDF), Mathematics of Computation, 62 (205): 305–324, doi:10.2307/2153411, JSTOR 2153411
  7. ^ Yao Wang and Xuelong Zhu, "A fast algorithm for the Fourier transform over finite fields and its VLSI implementation", IEEE Journal on Selected Areas in Communications 6(3)572–577, 1988
[edit]