Four factor formula
Appearance
(Redirected from Four-factor formula)
This article needs additional citations for verification. (April 2021) |
The four-factor formula, also known as Fermi's four factor formula is used in nuclear engineering to determine the multiplication of a nuclear chain reaction in an infinite medium.
Symbol | Name | Meaning | Formula | Typical thermal reactor value |
---|---|---|---|---|
Reproduction factor (eta) | neutrons produced from thermal fissions/thermal absorption in fuel isotope[2] | 1.65 | ||
Thermal utilization factor | thermal neutrons absorbed by the fuel isotope/thermal neutrons absorbed anywhere[2] | 0.71 | ||
Resonance escape probability | fission neutrons slowed to thermal energies without absorption/total fission neutrons | 0.87 | ||
Fast fission factor | total number of fission neutrons/number of fission neutrons from just thermal fissions | 1.02 |
The symbols are defined as:[3]
- , and are the average number of neutrons produced per fission in the medium (2.43 for uranium-235).
- and are the microscopic fission and absorption thermal cross sections for fuel, respectively.
- and are the macroscopic absorption thermal cross sections in fuel and in total, respectively.
- is the macroscopic fission cross-section.
- is the number density of atoms of a specific nuclide.
- is the resonance integral for absorption of a specific nuclide.
- is the average lethargy gain per scattering event.
- Lethargy is defined as decrease in neutron energy.
- (fast utilization) is the probability that a fast neutron is absorbed in fuel.
- is the probability that a fast neutron absorption in fuel causes fission.
- is the probability that a thermal neutron absorption in fuel causes fission.
- is the thermal non-leakage probability
Multiplication
[edit]The multiplication factor, k, is defined as (see Nuclear chain reaction):
- If k is greater than 1, the chain reaction is supercritical, and the neutron population will grow exponentially.
- If k is less than 1, the chain reaction is subcritical, and the neutron population will exponentially decay.
- If k = 1, the chain reaction is critical and the neutron population will remain constant.
In an infinite medium, neutrons cannot leak out of the system and the multiplication factor becomes the infinite multiplication factor, , which is approximated by the four-factor formula.
See also
[edit]References
[edit]- ^ Duderstadt, James; Hamilton, Louis (1976). Nuclear Reactor Analysis. John Wiley & Sons, Inc. ISBN 0-471-22363-8.
- ^ a b Lamarsh, John R.; Baratta, Anthony John (2001). Introduction to nuclear engineering. Addison-Wesley series in nuclear science and engineering (3rd ed.). Upper Saddle River, N.J: Prentice Hall. ISBN 978-0-201-82498-8.
- ^ Adams, Marvin L. (2009). Introduction to Nuclear Reactor Theory. Texas A&M University.