Jump to content

BRM P48

From Wikipedia, the free encyclopedia

This is the current revision of this page, as edited by Halmyre (talk | contribs) at 10:16, 12 August 2022 (add link for Intercontinental Formula). The present address (URL) is a permanent link to this version.

(diff) ← Previous revision | Latest revision (diff) | Newer revision → (diff)
BRM P48
CategoryFormula One
ConstructorBritish Racing Motors
Designer(s)Stewart Tresilian
PredecessorP25
SuccessorP57 Climax
Technical specifications[1]
ChassisSteel ladder frame
Suspension (front)double wishbones, coil springs over dampers, anti-roll bar
Suspension (rear)double wishbones, coil springs over dampers, anti-roll bar
Wheelbase90 in (228.6 cm)
EngineBritish Racing Motors 25 2,491 cc (152.0 cu in) S4 N/A, rear-mounted.
TransmissionBritish Racing Motors 4-speed transverse shaft. ZF differential.
Weight1,102 lb (499.9 kg) (Unladen)
FuelPetrol/alcohol mix.
TyresDunlop.
Competition history
Notable entrantsOwen Racing Organisation
Notable driversUnited Kingdom Graham Hill
United States Harry Schell
Sweden Joakim Bonnier
United States Dan Gurney
Debut1960 Monaco Grand Prix
RacesWinsPolesF/Laps
7001

The BRM P48 was a Formula One racing car raced in 1960. It was BRM's first rear-engined car. With rear-engined cars in the ascendancy, BRM hastily reworked the front-engined, now five-year-old P25. The car proved to be slow and unreliable, and was replaced by the P48/57 the following year.

Development

[edit]

Aside from the placement of the driver and engine, the P48 was mechanically the same as the outgoing P25. It featured the same 2.5 litre straight-4 engine producing 275 horsepower. The P48 also featured a single brake disc at the rear mounted directly to the gearbox. The rear bodywork was cut off to aid cooling, which exposed the unlovingly nicknamed "bacon slicer" rear brake.

During 1960 Tony Rudd designed his Mark II version of the car, with a conventional 2 disc rear brake layout, simple rear wishbone suspension and a much lower profile. This resulted in a much better handling car, and for the 1961 Formula One season BRM based their chassis designs on the Mark II.

Racing record

[edit]

For 1960, BRM campaigned three P48s for Joakim Bonnier, Graham Hill, and Dan Gurney. The P48 debuted in the second race of the season, the Monaco Grand Prix. To the surprise of everyone, including the team, all three cars finished. Bonnier scored points for fifth. However, this proved to be a false hope, as each driver finished only once more. At the Dutch Grand Prix, Hill finished a respectable third behind the Coventry Climax engined Cooper and Lotus of Jack Brabham and Innes Ireland. Sadly, Gurney's rear brake failed on the entry to Zandvoort's first hairpin; his BRM rolled into the stands, killing one spectator and injuring several others. After the Zandvoort disaster, BRM scored just once more with Bonnier in the United States Grand Prix. BRM finished the season with a disappointing 8 points.

The Mark II cars were raced in the 1961 Intercontinental Formula races.

Dan Gurney won the 1961 Victorian Trophy at the Ballarat Air Strip circuit in Victoria, Australia driving a P48.[2]

Complete Formula One World Championship results

[edit]
Year Entrant Engine Tyres Drivers 1 2 3 4 5 6 7 8 9 10 Points WCC
1960 Owen Racing Organisation BRM P25 2.5 L4 D ARG MON 500 NED BEL FRA GBR POR ITA USA 8 4th
Graham Hill 7 3 Ret Ret Ret Ret Ret
Joakim Bonnier 5 Ret Ret Ret Ret Ret 5
Dan Gurney NC Ret Ret Ret 10 Ret Ret

References

[edit]
  1. ^ Ménard, Pierre (2000). The Great Encyclopedia of Formula One. London, England: Constable & Robinson Ltd. p. 432. ISBN 1-84119-259-7.
  2. ^ Victorian Trophy, Ballarat, 12 Feb 1961, www.oldracingcars.com, as archived at web.archive.org
  • Nye, Doug (2003). BRM: The Saga of British Racing Motors: Rear-Engined Cars, 1960-79. Vol 2. Motor Racing Publications. ISBN 1-899870-00-8.